Recording 2 
Automatic recording (motion pictures)
1 Set to [
].
To change aspect ratio to 4:3
→[ADVANCED]→ [ASPECT]→[4:3]
Default aspect ratio at the time of purchase is set to 16:9 (widescreen).
To remove sound when record button is pressed
→[SETUP]→ [BEEP SOUND]→[OFF]
To remove
→[SETUP]→ [DISPLAY]→[OFF]
2 | Press | . |
3 | Start recording. |
|
Recording |
| |
| mode | Time elapsed |
Recording in progress (red)
Time remaining (flashes red when under 1 minute)
Recording continues even if the LCD monitor is closed.
4 Stop recording.
Paused (green)
The unit is still recording if [
] is red. Do not move the unit.
●When the unit is running on battery power, power is automatically shut OFF to conserve battery life if no operations are performed for about 5 minutes. To reuse the unit, set the mode dial to [OFF] and then reselect a mode.
To prevent power from shutting OFF automatically: (P.84 [POWER SAVE])
●The interval between starting and stopping recording is recorded as one single scene. The counter is reset to “0h00m00s” after each scene.
●At the time when the unit is purchased, the audio recording mode is set to [DOLBY]. For playback in a device which does not support Dolby Digital, set [AUDIO REC] to [MPEG]. (P.84)
34 VQT1M21