Panasonic SDR-SW20P operating instructions Setup menu, Purpose

Others 1 Menus (cont.)

SETUP menu

Item		Purpose
DISPLAY	Display current information or settings on the LCD monitor.
	•Even when [OFF] is set, the operating status, date, world time
	and underwater mode displays remain displayed.
DATE/TIME	Select the date and time display mode.
DATE FORMAT	Select the date display format.
FORMAT CARD	Format SD cards.
QUICK START	Start recording instantly.
POWER SAVE	Shut off power if the unit is not being operated.
	This function does not work in the following cases.
	•While using the AC adaptor
	•While connected to a computer or printer via USB
AUDIO REC	Set the audio recording mode.
	In this unit, the audio mode cannot be changed after recording,
	but if MotionSD STUDIO provided with the unit is used, sound can
	be recorded on DVD discs using [DOLBY] or on SD cards using
	[MPEG].
BEEP SOUND	Allow operations such as starting and ending recording to be
	signaled by a beep.
	When [ON]
	Beep:	•When recording starts or power is turned on
		•When a computer or printer is recognized
	Beep-Beep: •When recording stops or power is shut off
	Beep-Beep, Beep-Beep … (4 times consecutively):
		•If an error that prevents recording occurs, etc. Check
		the message (P.88) that appears on the LCD monitor.
POWER LCD	Brighten the LCD monitor more than usual.
LCD SET	Adjust brightness or color density of the LCD monitor.
TV ASPECT	Display images at the aspect ratio of a connected TV.
EXT. DISPLAY	Display information on a connected TV.
RESUME PLAY	Continue playback from the point it was stopped.
INITIAL SET	Return all settings except for [LANGUAGE] and [CLOCK SET] to
	their defaults at the time of purchase.
DEMO MODE	Display an introduction to the unit (demonstration mode).
	The demonstration stops when any operation except pressing the
	[AUTO] or [MANUAL AF/MF] button is performed, but it will resume
	if no operations are performed for approx. 10 or more minutes.

84 VQT1M21