With other | Copying to video recorders |
products | 2 or DVD recorders |
|
Motion pictures recorded with this unit can be copied to TV video recorders and DVD recorders (hereinafter referred to as “recorder”). For recorders settings, see the operating instructions of the recorders.
Copying pictures using the AV cable (supplied)
Connect the unit and AC adaptor (P.22) and set the mode dial to []. Connect the unit and recorder with the AV cable (supplied).
VIDEO IN |
AUDIO IN |
Insert the plugs as far as they will go.
Change the input mode on the TV and recorder.
Play back motion pictures from the unit (P.52) and start recording on the recorder.
After ending recording on the recorder, stop playback from the unit.
●Do not use any other AV cables except the supplied one.
●When copied motion pictures are played back on a
Copying (dubbing) pictures using DVD recorders with SD card slot
By inserting SD cards recorded on this unit into DVD recorders with an SD card slot, pictures can be copied onto hard disk drives and DVDs.
After shutting off power to the unit, eject the recorded SD card. (P.25) Insert the SD card into the SD card slot of the DVD recorder.
●For details, see the operating instructions of the DVD recorder.
●The video format is converted when motion pictures recorded with this unit are copied onto hard disk drives or DVDs. The converted motion picture cannot be copied at high speed onto
Moreover, motion pictures that are copied back onto SD cards using a computer or other device do not play back on this unit.
VQT1M21 61