HTC RAPH800 manual Using Letter Recognizer, Using Transcriber

Using Letter Recognizer

With Letter Recognizer, you can write individual letters, numbers, and punctuation marks, which are then converted into typed text.

To use Letter Recognizer:

1.From a program, tap the Input Selector arrow and then tap Other Input Methods > Letter Recognizer.

2.Write characters, numbers, and symbols in the designated writing area.

Enter uppercase letters by writing in the ABC (left) area of the box.

Enter lowercase letters by writing in the abc (middle) area of the box.

Enter numbers by writing in the 123 (right) area of the box.

Enter punctuation and symbols by writing the desired character in the 123 (right) area of the box.

Tip

For help with writing characters, tap the question mark near the writing area.

Using Transcriber

Transcriber is a handwriting recognition program that enables you to write in cursive, print, or a combination of both.

To write using Transcriber:

1.Open a program that accepts user input, such as Word Mobile.

2.Tap the Input Selector arrow and then tap Other Input Methods > Transcriber. The Transcriber introductory screen appears. Read the introduction and tap ok.

3.Position the cursor where you want text to appear.

4.Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.

To enter punctuation and symbols:

Transcriber comes with an onscreen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this keyboard, tap on the Transcriber toolbar.

The keyboard remains visible until you tap the button again.

Tips	•	To reposition the keyboard, tap and hold the title bar, and then drag it to the desired location.
	•	When no text is selected, you can open the keyboard by using the gesture (draw a line straight down and
		then straight up). For more information about using Transcriber gestures, see Help on your device.

To edit text:

1.In a program, draw a line from left to right across the text you want to edit.

2.After you lift the stylus from the screen, the line disappears and the selected text will be highlighted.

3.Do either of the following:

Rewrite the text.

Use gestures to capitalize letters, insert spaces, and so on. For information about using Transcriber gestures, see Help on your device.

62 Section 2D. Entering Text