HTC RAPH800 manual Making a Call from Contacts, Making a Call from the TouchFLO 3D Home screen

4.To call a number or contact, either:

Tap the desired phone number or contact from the list.

— or —

Call a different phone number associated with the displayed contact by pressing the Navigation Control up or down to select the contact, and then press the Navigation Control right or left to select the number to call.

5.Press the Talk key to place the call.

Tip

•When in a call, use the Volume Up or Down keys on the side of the device to adjust the phone volume.

•Tap to close the Phone keypad to see if there are more matching numbers or contacts.

•To send a text message to a selected contact, tap Menu > Send Text Message. For more information about sending text messages, see “Using SMS Text Messaging” on page 133.

Note

After tapping six keys and the number you are dialing is not in your contacts, a Save to Contacts? button will appear above the Phone keypad. Tap it to save the number to your Contacts.

Making a Call from Contacts

1.Tap Start > Contacts to open the Contacts screen.

2.Select the contact to call and then press the Talk key.

Note

If the contact has more than one number stored, press the Navigation Control right or left to select the number you want to call before pressing the Talk key.

— or —

Tap the contact to open the contact details, and then tap the phone number you want to call.

— or —

Tap and hold the contact you want to call, and then from the menu, select Call Work, Call Home, or Call Mobile.

Making a Call from the TouchFLO 3D Home screen

To learn how to choose a favorite a contact and make a call from the TouchFLO 3D Home screen, see “Choosing from Your Favorite Contacts” on page 40.

Making an International Call

1.Tap and hold on the Phone screen until the plus (+) sign appears. The plus (+) sign replaces the international prefix of the country that you are calling.

2.Enter the full phone number you want to dial, and press the Talk key on your device. The full phone number includes the country code, area code (without the leading zero, if any), and phone number.

Setting the Device to Vibrate When a Call is Established

You can set the device to vibrate once to alert you that the call has been established with the other party.

1.On the Phone screen, tap Menu > Options... > Advanced tab.

2.Select the Vibrate device when connection is established check box and then tap ok.

28 Section 2B. Using Phone Features