HTC RAPH800 manual Using the Strap Holder

Using the Strap Holder

The strap holder at the bottom of the back cover of your device allows you to attach a wrist strap, lanyard, or string accessory.

To attach a strap, lanyard or string accessory to the strap holder:

1.Remove the back cover.

2.Insert the loop of the strap, lanyard, or string accessory through the strap holder hole on the back cover.

Tip

To pass a loop through the strap holder easier, push the loop into the strap holder hole using a pointed object such as a needle or toothpick.

3.Attach the loop over the small t-shaped hook at the bottom of the device.

4.Slightly pull the strap, lanyard, or string accessory to fix it securely on the t-shaped hook.

5.Replace the back cover.

128 Section 2J. Managing Your Device