Playback 2 
Viewing still pictures
Recorded still pictures (scenes) can be played back on the unit.
Do not remove the SD card while it is being accessed (card access lamp lit).
1 Set to [ ]. | 3 Enter the picture to view. |
Thumbnails are displayed.
2 Select the desired scene.
A yellow frame appears 
around the selected scene.
Scene No.
To move to the next page: either press the left and right
cursor button or select 
or 
and press the center of
the cursor button.
Slideshow start/pause
To previous | To next |
scene | scene |
Return to thumbnail
To fast-forward/rewind
While pressed and held, 
only the scene No.
changes rapidly.
Release the cursor button when the desired scene No. appears.
●This unit complies with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association) and can play back JPEG pictures. (Some JPEG pictures cannot be played back.)
●Some still pictures recorded on other devices may not play back correctly. Similarly, still pictures recorded on this unit may not play back correctly on other devices.
●Thumbnails in which [
] appears cannot be played back.
●Time may be required to play back some still pictures depending on the number of recorded pixels.
●If the unit is running on battery power, [POWER SAVE] (P.84) is set to [5 MINUTES] and play pause is continued for 5 minutes, the power shuts off.
●The power does not shut off when the LCD monitor is closed.
●Do not rotate the mode dial during slideshows.
VQT1M21 55