| Power |
Problem | Check points |
“ERROR OCCURRED. | ≥ The unit has automatically detected an error. Restart the unit |
PLEASE TURN UNIT OFF, | by turning off and on. |
THEN TURN ON AGAIN.” | ≥ The unit will be turned off in about 1 minute if the unit is not |
is displayed. | turned off and on. |
| ≥ Repair is needed if it is repeatedly displayed even if it is |
| restarted. Detach the power connected, and consult the |
| dealer who you purchased this unit from. Do not attempt to |
| repair the unit by yourself. |
|
|
| Indication |
Problem | Check points |
Function display | ≥ [CARD&BATTERY] or [OTHER DISPLAY] of the |
(Remaining Display, | [SW & DISP SETUP] is [OFF]. (l 97) |
Counter Display, etc.) is | ≥ Press the COUNTER button to switch the counter display. |
not displayed | (l 51) |
|
|
| Recording |
Problem | Check points |
The unit arbitrarily stops | ≥ Use an SD card that can be used for motion picture recording. |
recording. | (l 16) |
| ≥ The recordable time may have shortened due to the |
| deterioration of the data writing speed or repeated recording |
| and deletion. Using the unit, format the SD card. (l 28) |
|
|
Auto Focus function does | ≥ Switch to Intelligent Auto Mode. |
not work. | ≥ If you are trying to record a scene which is hard to bring into |
| focus in Auto Focus Mode, use the Manual Focus Mode to |
| adjust the focus. (l 34, 38) |
|
|
Color or brightness of the | ≥ Color or brightness of the image may change, or you may see |
image changes, or you | horizontal bars in the image when the object is recorded |
may see horizontal bars in | under fluorescent light, mercury light or sodium light, etc., but |
the image. | this is not a malfunction. |
| ≥ Perform following operation. |
The LCD monitor flickers | jRecord in the Intelligent Auto Mode |
indoors. | jSet the shutter speed to 1/60 in areas where the power |
| supply frequency is 60 Hz, or 1/100 in areas of 50 Hz. |
|
|