Connecting to a PC
AUSB cable (supplied)
≥Insert the plugs as far as they will go.
≥Insert the SD card.
1 Connect this unit to the AC adaptor.
≥Use the AC adaptor to free you from worrying about the battery running down.
2 Turn on the unit.
3
≥The USB function selection screen will appear on the screen of the unit.
4 Touch [PC] on the screen of this unit.
≥This unit is automatically recognized as an external drive of the PC. (l 82)
≥When you select an option other than [PC], reconnect the USB cable.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)
≥When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or SDXC Memory Card.
≥If you are using an SDXC memory card, some PC may not recognize the data. Make sure your PC supports SDXC cards.
∫To disconnect USB cable safely
(If using Windows)
Select the icon in task tray displayed on the PC, and then click [Eject AVCCAM Handheld].
≥Depending on your PC’s settings, this icon may not be displayed.
(If using Mac)
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
- 81 -