About recovery
If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.)
≥
is displayed when abnormal management information is detected when the scenes are displayed in thumbnail.
∫AVCCAM Restorer
Restoration can be performed using AVCCAM Restorer.
It can be downloaded from the website below.
http://pro-av.panasonic.net
≥For details on usage, please read the AVCCAM Restorer Operating Instructions (PDF file).
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.
≥When data recorded on another device is recovered, it may not be possible to play back the data on this unit or the other device.
≥If recovery fails, turn the unit off and on again after waiting awhile. If recovery fails repeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the data recorded on the media will be erased.
≥If the thumbnail information is recovered, displaying the thumbnails may become slower.
Others
Updating the firmware incorporated into the unit
To check the latest information on the firmware and update methods, refer to the following support page on the Panasonic website.