Adjusting the audio input level
∫Adjusting the input level of the built-in microphone (5.1 ch)
≥Set the [MIC SETUP] to anything other than [2ch]. (l 45)
1 Select the menu.
MENU : [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting
[AUTO]: | ALC is activated, and the recording level is adjusted automatically. |
|
|
[SET]/[SETr
]: The desired recording level can be set.
2 (When [SET]/[SETr
] is selected)
Touch 
/ 
to adjust the microphone input level.
≥Touch 
to activate/disactivate ALC. When ALC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When ALC is disactivated, natural recording can be performed.
≥Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for microphone input level.
3 Touch [ENTER] to set the microphone input level and then touch [EXIT].
≥
is displayed on the recording screen when the ALC is turned on.
ACenter B Front left C Back left D Front right E Back right
F Microphone input level
≥When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
≥You cannot record with the audio completely muted.
- 49 -