Panasonic BT-LT80W Color TEMP.∗1, Gain RED, Gain Green, Gain Blue, Bias RED, Bias Green, Reset

Main Menu (continued)

About IP Mode

By selecting “MODE1”, you can convert IP through Frame Interpolation.

This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 1 frame delay or more.

Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.

By selecting “MODE2”, you can convert IP through Field Interpolation.

Since MODE2 interpolates only within each Field, it is suitable to confirm interlace condition.

Depending on still images, etc., flickers may occur on the screen. In such a case, “MODE1” is recommended.

WB adjustment mode

You can adjust “WHITE BALANCE VAR1” - “WHITE BALANCE VAR3” (WB) by selecting “VAR1” - “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu.

			The underlined values are factory preset setting values.
Sub menu	Settings	Explanation
COLOR TEMP.∗1	USER 0 - 63	Used to select the color temperature that will become the
	D93	basis for adjustments.
	D65	<USER 0 - 63>Adjustable settings 0 - 63
	D56		(color temperature around 3000K - 9300K)
		<D93>	Color temperature around 9300K
		<D65>	Color temperature around 6500K
		<D56>	Color temperature around 5600K
GAIN RED	0 - 511	GAIN elements for RED are adjusted.∗2
	(Factory presets
GAIN GREEN		GAIN elements for GREEN are adjusted.∗2
	are values for color
GAIN BLUE		GAIN elements for BLUE are adjusted.∗2
	temperature <D65>.)
	∗ The presets are
	values adjusted
	before shipment from
	factories.
BIAS RED	–512 - 511	BIAS elements for RED are adjusted.∗2
BIAS GREEN	(Factory preset settings:	BIAS elements for GREEN are adjusted.∗2
	0)
BIAS BLUE		BIAS elements for BLUE are adjusted.∗2
RESET		“GAIN RED” - “BIAS BLUE” values are reset to color temperatures
		values selected in “COLOR TEMP.”.

∗1 When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the selected color temperature values.

∗2 When adjusting, the item display moves to the lower part of the screen.

20