Main Menu (continued)
SYSTEM CONFIG
|
|
| The underlined values are factory preset setting values. |
Sub menu | Settings | Explanation |
|
CONT. /BACK. | BACKLIGHT | Used to select the function to be assigned to CONT/B.LIGHT (a knob | |
| CONTRAST | on the front panel). | |
|
| <BACKLIGHT> Used to adjust BACKLIGHT. | |
|
| <CONTRAST> Used to adjust CONTRAST. | |
BACKLIGHT | 0 - 60 | Used to adjust the LCD backlight level. | |
|
| <Note> |
|
|
| CONT./BACK displays | |
PEAKING/PHASE | PEAKING | Used to select the function to be assigned to PEAK/PHASE (a knob | |
| PHASE | on the front panel). | |
|
| <PEAKING> | Assigns to the PEAKING function. |
|
| <PHASE> | Assigns to the PHASE function. |
STATUS DISPLAY | CONTINUE | Used to set the display time for the status display. | |
| 3SEC OFF∗1 | <CONTINUE> Always displayed. | |
| OFF | <3SEC OFF> | Displayed for 3 seconds. |
|
| <OFF> | Not displayed. |
BATTERY REMAIN | OFF | Used to select whether or not to display the battery level. | |
| ON | <OFF> Not displayed. | |
|
| <ON> Displayed. | |
SETUP LOAD | FACTORY | Used to load the saved factory preset setting values (FACTORY) or | |
| USER1 | user data (USER 1 - USER 5). | |
| USER2 | <FACTORY> The factory preset settings. | |
| USER3 | <USER1 - 5> The saved USER data ∗2. | |
| USER4 | When the unit is shipped from the factory, the USER 1 to 5 data items | |
| USER5 | are the same as the factory preset values. | |
SETUP SAVE | USER1 | Used to save user data. | |
| USER2 | Up to 5 sets of user data can be saved, which include the current | |
| USER3 | setting values for the menu and picture adjusting knobs. | |
| USER4 |
|
|
| USER5 |
|
|
PWR ON SETUP | LAST | Used to select the settings for when the power supply is switched | |
| FACTORY | ON. |
|
| USER1 | <LAST> | Starts up with same settings as the last time the power |
| USER2 |
| supply was switched OFF. |
| USER3 | <FACTORY> Starts up with the FACTORY settings. | |
| USER4 | <USER1 - 5> Starts up with the settings that are saved in a USER | |
| USER5 |
| item. |
∗1 Functions as CONTINUE when 
(warning of improper operation status for the camera settings) is displayed or when the
∗2 USER saving is not possible when CONTROL is set to REMOTE.
21