How to Use the On Screen Menu (continued)
Sharpness display
SHARPNESS H 30
•SHARPNESS H/V is displayed when it is set.
•The display disappears if remains idle for 2 minutes.
Function display
F1:MARKER
F2:WFM
F3:PIXEL TO PIXEL
XXXXX
•You can set FUNCTION display in the menu.
•When “FUNCTION DISPLAY” (→ page 23) is ON1 or ON2 and one of the buttons from [FUNCTION1] to [FUNCTION3] is pressed, the unit displays the status of the FUNCTION item that is set.
•The display disappears if remains idle for 2 seconds.
•The operational status is displayed in “XXXXX” (→page 24 “Operation status displayed when a FUNCTION button is used”).
DC power supply voltage and battery level display
DC14.0V
50%
Menu display
[MAIN MENU]
MARKER VIDEO CONFIG SYSTEM CONFIG
VF CONFIG FUNCTION GPI INPUT SELECT CONTROL HOURMETER
MENU EXIT 
SEL. ENTER ENTER 
•DC power supply voltage is displayed.
•Battery level is displayed when using an Anton/Bauer type digital battery.
•Displayed when the operating status display is not displayed.
•This is displayed when the menu is used.
•The display disappears if remains idle for 2 minutes.
Displays the operation explanation for the menu button.
13