User Data
You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 combinations of screen adjustment values as user data. You can also return the setting values and adjustment values to the factory preset settings.
The following settings are included in user data.
•Menu settings except for “SETUP LOAD/SAVE” and “REMOTE of CONTROL” (including the button function settings on the front of the monitor)
•Screen adjustment values changed in picture adjusting knob
Saving user data
1.Push [MENU] to display the MAIN menu.
2.Push [
, 
] to select the “SYSTEM CONFIG” menu and push [ENTER].
3.Push [
, 
] to select the “SETUP SAVE” sub menu and push [ENTER].
The setting values in the sub menu change to green.
[SYSTEM CONFIG] |
|
|
|
CONT./BACK. | BACKLIGHT |
| |
BACKLIGHT |
| ||
PEAKING/PHASE | PEAKING |
| |
STATUS DISPLAY | 3SEC OFF |
| |
BATTERY REMAIN |
| OFF |
|
SETUP LOAD | FACTORY |
| |
SETUP SAVE |
| USER1 |
|
|
| ||
PWR ON SETUP |
| LAST |
|
MENU EXIT 
SEL. ENTER ENTER
Changes to green
4.Push [
, 
] to select the file you wish to save to from “USER1” – “USER5”, then push [ENTER]. The following screen appears.
[SETUP SAVE]
USER1
YES
NO
MENU EXIT 
SEL. ENTER SET
5.Select “YES”, and push [ENTER]. The user data is saved.
Loading user data
1.Push [MENU] to display the MAIN menu.
2.Push [
, 
] to select the “SYSTEM CONFIG” menu and push [ENTER].
3.Push [
, 
] to select the “SETUP LOAD” sub menu and push [ENTER].
The setting values in the sub menu change to green.
[SYSTEM CONFIG] |
|
|
|
CONT./BACK. | BACKLIGHT |
| |
BACKLIGHT |
| ||
PEAKING/PHASE |
| PEAKING |
|
STATUS DISPLAY |
| 3SEC OFF |
|
BATTERY REMAIN |
| OFF |
|
SETUP LOAD |
| FACTORY |
|
SETUP SAVE |
| USER1 |
|
PWR ON SETUP |
| LAST |
|
MENU EXIT 
SEL. ENTER ENTER
Changes to green
4.Push [
, 
] to select the file you wish to load to from “USER1” – “USER5”, then push [ENTER]. The following screen appears.
To return to the factory preset setting values, select “FACTORY”.
[SETUP LOAD]
USER1
YES
NO
MENU EXIT 
SEL. ENTER SET
5.Select “YES”, and push [ENTER]. The user data is loaded.
To return to the previous screen Push [MENU].
15