Features
zzHD and SD format simultaneous operation possible
As a standard feature, the unit incorporates not only HD video signal outputs but SD video signal outputs (SDI and analog composite).
zzBAR ID display
Characters can be displayed on the color bar signals so as to identify the output source of the images, and then output.
zzPrompter
As a standard feature, the unit incorporates prompter input (analog composite)
zzSupport for memory cards
The upgrade software and unit’s setting data can be saved to a memory card.
Accessories
Check the accessories.
zzAfter unpacking the product, dispose of the packaging material appropriately.
1 |
zzOperating Instructions <Basics>
zzOperating Instructions <Operations and Settings>
Power cable |
|
for | 1 |
for | 2 |
Precautions for use
Observe the following in addition to the information included in “Read this first!”.
Handle carefully | Optical fiber multi cable |
Do not drop the product or subject it to a strong impact. | When the optical fiber connectors of the optical fiber multi cable (sold |
Doing so may cause a failure or accident. | separately) become dirty, the optical signal transmission state will |
Avoid using the unit outdoors | deteriorate. |
Use commercially available optical connector cleaner to clean the optical | |
| end faces in accordance with the instructions. |
Use the product in an ambient temperature of 0 °C to 40 °C (32 °F to 104 °F)
Avoid using the product in a cold place where the temperature drops below 0 °C (32 °F) or in a hot place where the temperature rises above 40 °C (104 °F) because an extremely low or high temperature will adversely affect the internal parts.
Disposal of the unit
When the unit has reached the end of its service life and is to be disposed of, ask a qualified contractor to dispose of the unit properly in order to protect the environment.
Turn off the power before connecting or disconnecting cables
Before connecting or disconnecting the cables, be sure to turn the power off.
Avoid humidity and dust
Avoid using the product in a very humid or dusty place because a lot of humidity and dust will cause damage to the internal parts.
Cleaning
Turn the power off and wipe the product with a dry cloth.
To remove stubborn dirt, dip a cloth into a diluted solution of kitchen detergent (neutral detergent), wring it out well, and wipe the product gently. Then, wipe the product with a cloth dampened with water. Finally, wipe the product with a dry cloth.
Note
zzAvoid using benzine, paint thinners and other volatile fluids. zzIf a chemical cleaning cloth is to be used, carefully read through
the precautions for its use.
10