Panasonic AK-HCU200ES operating instructions Read this first! For AK-HCU200P, AK-HCU200PS

Page 3

Read this first! (For AK-HCU200P, AK-HCU200PS)

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

This equipment must be grounded.

To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal household wiring.

Extension cords used with the equipment must have three cores and be correctly wired to provide connection to the ground. Wrongly wired extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that the power outlet is grounded or that the installation is completely safe. For your safety, if you are in any doubt about the effective grounding of the power outlet, please consult a qualified electrician.

WARNING:

To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

To reduce the risk of fire or electric shock, keep this equipment away from all liquids. Use and store only in locations which are not exposed to the risk of dripping or splashing liquids, and do not place any liquid containers on top of the equipment.

CAUTION:

In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation.

CAUTION:

The mains plug of the power supply cord shall remain readily operable.

The AC receptacle (mains socket outlet) shall be installed near the equipment and shall be easily accessible. To completely disconnect this equipment from the AC mains, disconnect the power cord plug from the AC receptacle.

CAUTION:

This apparatus can be operated at a voltage in the range of 100 – 240 V AC.

Voltages other than 120 V are not intended for U.S.A. and Canada.

Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.

CAUTION:

Invisible Laser radiation is emitted from the Optical fiber connector when this product is turned on.

Don’t look into directly into the Optical fiber connector of this product.

CAUTION:

This product uses a semiconductor laser system and is a laser class 1 product complies with Radiation Performance Standards, 21CFR SUBCHAPTER J. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Don’t make any modifications. Don’t repair by yourself.

Refer servicing to qualified personnel.

WARNING:

Always keep memory cards or accessories out of the reach of babies and small children.

CAUTION:

To reduce the risk of fire or electric shock and annoying interference, use the recommended accessories only.

CAUTION:

Keep the temperature inside the rack to between 0 °C to 40 °C (32 °F to 104 °F).

Bolt the rack securely to the floor so that it will not topple over when the unit is drawn out.

indicates safety information.

3

Image 3
Contents AK-HCU200P AK-HCU200PS AK-HCU200E AK-HCU200ES Pp Come aprire i file dei manuali di istruzioni per l’uso It can be downloaded from the home page of Adobe SystemsRead this first! For AK-HCU200P, AK-HCU200PS FCC Note Read this first! For AK-HCU200P, AK-HCU200PSRead this first! For AK-HCU200E, AK-HCU200ES Performance level Read this first! For AK-HCU200E, AK-HCU200ESFor Continental EUROPE, ETC. Not to be used in the U.K How to replace the fuseContents Http//pro-av.panasonic.net IntroductionFeatures AccessoriesPrecautions for use Precautions for Installation Connections System configurationParts and their functions Avbs connector OUT/PM HD/SD SDI OUT connectors 1, 2, 3/PM, and 4/PM? Return in connectors HD/SD SDI 1 and HD/SD SDI  Prompt connector Grounding terminal Signal GND Iincom switches 1 Tally switch MAKE/V KAC power socket ACTroubleshooting ZzWeb settings Unit mm inch AppearanceSpecifications For business users in the European Union