Parts and their functions (Continued)
Rear panel
|
| | |
| |
| |
| | | | | | | |
>HD/SD SDI OUT connectors [1], [2], [3/PM], and [4/PM]
These connectors (BNC) are for outputting SDI signals in HDTV and SDTV formats.
The HD/SD output mode can be selected by setting a menu item. The output mode can be switched between the [1] and [2] combination and between the [3/PM] and [4/PM] combination. SDI output from [3/PM] and [4/PM] can be switched to main line image output or picture monitor output by setting a menu item or by ROP control.
Refer to “SETTING1 Screen” of <Operations and Settings> (pages 11 and 27).
?RETURN IN connectors
[HD/SD SDI 1] and [HD/SD SDI 2]
These connectors (BNC) are for inputting SDI signals for return images in HDTV and SDTV formats.
The HD/SD input mode can be selected by setting a menu item.
Refer to “SETTING1 Screen” of <Operations and Settings> (pages 11 and 27).
[VBS]
This connector (BNC) is for inputting analog composite signals for return images in SDTV format.
PROMPT connector [IN]
This connector (BNC) is for inputting SD analog composite signals for the prompter.
AVBS connector [OUT/PM]
This connector (BNC) is for outputting analog composite signals in SDTV format.
Output can be switched to main line image output or picture monitor output by setting a menu item.
Refer to “SETTING1 Screen” of <Operations and Settings> (pages 11 and 27).
BREF connectors
These connectors (BNC) are for inputting reference signals.
Black burst (BB) signals and
When no cable is connected to the
When a cable is connected to the
Reference signal input
MIC OUT 1 connector and MIC OUT 2 connector
These connectors are for outputting the analog signals of microphones 1 and 2 of the camera.
The microphone level is 0 dBm/600 Ω.
<Notes>
zzWhen connecting the MIC OUT 1 and MIC OUT 2 connectors (XLR terminals) to the unbalanced input terminals of an external device, connect them as shown in the diagram below.
XLR terminal | PIN terminal | ||
(unbalanced input terminal) | |||
|
| ||
1 | 2 |
| |
| 3 |
| |
1: Ground (shield) | zzMake pin 3 open. |
2:Hot (+Ve)
3:Cold
zzSome commercially available adapter connectors and adapter cables have pin 3 shorted to pin 1.
Using such an adapter connector or adapter cable will cause a failure.
DO NOT USE
1 | 2 |
| 3 |
zzDo not use an adapter connector or adapter cable that has pin 3 shorted to pin 1.
CAMERA connector
This connector is for connecting the optical fiber multi cable (sold separately).
EROP connector
This connector is for connecting a ROP (sold separately).
MSU connector
This connector is for connecting an MSU (sold separately). This connector is for future function expansion.
It is not currently supported.
COMMUNICATION connector
This connector is for connecting the intercom signals and tally signals to the external system.
HLAN connector
This LAN connector (RJ45) is for connecting a computer when configuring the Web settings.
Use a
14