Parts and their functions

Front panel

 



 







1POWER switch

This is the unit’s power switch.

Move it to the ON position to turn on the power.

2POWER lamp

This lights when power switch 1 is set to ON and power is supplied to the unit.

3ALARM lamp [OPEN]

This lights when the unit and camera are not connected by the optical fiber multi cable.

[SHORT]

This lights when the cable connecting the unit and camera has been short-circuited.

4TALLY/CALL button

This functions both as the CALL button, which is pressed when calling the camera side, and the tally lamp.

The lamp remains lit while tally signals (R) are input.

When the CALL button is pressed on the camera, ROP or CCU, it is lit while no tally signals are input, and off while tally signals are input.

 



9INCOM connector

This connector enables calls with the intercom line of the camera. Calls cannot be made with the camera when the camera’s power is OFF.

:MENU button

When you hold down this button, the menu screen is displayed on the picture monitor and the MENU button lights.

Holding down this button while a menu is displayed ends menu display and turns off the MENU button.

zzWhen the REMOTE OPERATION menu is displayed by ROP operation, the menu display of this unit ends and also the MENU button turns off.

 Refer to “Menu operations” of <Operations and Settings> (page 9).

SELECT dial

This jog dial is for menu screen operations.

When the SELECT dial is turned clockwise, the cursor moves down; conversely, when it is turned counterclockwise, the cursor moves up. Press the SELECT dial to select the menu items.

<Memory card access lamp

This is lit while the memory card is being accessed.

5SYS PRIV switch

This switch is for selecting the party to call using the intercom.

SYS	:	For calling the intercom on the system side and camera side.
PRIV	:	For making private calls between the unit and camera side.

6MIC switch

ON	: The intercom microphone is turned on.
OFF	: The intercom microphone is turned off.
PTT	: The intercom microphone is on only while the switch is held
	down.

7PGM switch

ON	: The sound of PGM is mixed with the intercom sound.
OFF	: The sound of PGM is not mixed with the intercom sound.

8LEVEL controls [INCOM]

These controls are for adjusting the volume level of the sound heard through the intercom.

[PGM]

This is for adjusting the volume level of the PGM sound to be mixed with the intercom sound.

=Memory card slot

Insert a memory card (sold separately).

A memory card can be used to set this unit and upgrade the software.

Refer to “SD CARD Screen” of <Operations and Settings> (page 25).