Samsung SCC-B5397N, SCC-5399N, SCC-5399P, SCC-B5331 AGC Color SUP, Reverse, Posi/Nega, Pip, Detail

Page 23

How to use OSD Menu

DIGITAL ZOOM

Note :

RATIO

[X1.0]

 

 

 

 

< LOCATION > ￿

 

 

 

m e.

￿ ￿ ￿

Use of DC 12V will fix V-SYNC to INT, which can not be changed.

AGC COLOR SUP

[LOW , MID, HIGH]

Adjust the color scheme according to the AGC value.

REVERSE

[OFF, H, V, H/V]

Mirrors video signals horizontally, vertically, or both.

POSI/NEGA

[+, -]

 

- LOCATION : If you press the SETUP switch in the

 

condition where the image is enlarged as much as the

t

ratio setting, you can watch an invisible area of the

effective screen as well using the cdef switch.

 

Output as it is or mirror the video brightness signal.

PIP

[OFF, ON]

Displays a sub image together with the main image on the same screen using the Picture In Picture function.

 

Note :

 

 

If the digital zoom factor is set to larger than 1x, the FENCE

 

function will be deactivated.

 

The DIGITAL ZOOM function enlarges the pixel itself, which can

 

cause deterioration of the quality.

.

DETAIL

[0~3]

L

Controls the horizontal or vertical distinction.

V-SYNC

[INT, LINE]

Select the vertical sync mode for INT or LINE.

If you select INT, the camera will use the internal synchronization.

If selecting LINE, the camera will use the external power source frequency for the synchronization.

You can adjust the LL-PHASE.

Note :

If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated.

If the INTELLIGENCE function is set to FENCE mode, the PIP menu will be deactivated.

DIS

[OFF, ON]

Digital Image Stabilization will set the anti-shake

compensation.

Note :

If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor.

If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation, the DIS function will be deactivated.

English 23

Image 23
Contents Camera Safety information Humidity. Doing so may cause fire or electric shock Safety information Contents Introduction FeaturesCeiling or wall。 User’s GuideYour camera has the following components Lens Video connector Power connectorSetting switches Setup Switch Installing camera InstallationInstallation Panning Tilting Lens rotation Adjusting the camera directionMain Menu How to use OSD MenuUsing Icons in the Menu Profile RED DAY ModeNight Burst RED Blue NightIris ALC Camera SetupOFF, on VPS② If you set the Backlight option to BLC Level menu is used to adjustYou will see a menu where you can set Brightness and will decrease itAGC User AGC OFF, Very LOW, LOW, MID, HIGH, Very HIGH, USER, FIXMotion AGC FIXSENS-UP DNRShutter Auto FlickerlessDAY Mask Area Size Location White BAL DAY/NIGHT Mode AWC RED Blue GainDigital Zoom PIP AGC Color SUPReverse POSI/NEGAAdvanced IntelligenceTracking DetectionFIXED/MOVED Size of the area ② If you change the Pixel Level for settingSensitivity Privacy Zone SetupResolution DisplayExternal TRG Other SETDeactivated OSD Color Factory DefaultsSystem Information LanguageAuto Initial Configuration TableFast Off/On Specifications30frame/1sec Color White Auto Iris DC25frame/1sec SpecificationsSub-items SCC-B5397P/SCC-5399P DC12V ± 10%
Related manuals
Manual 178 pages 39.39 Kb Manual 174 pages 62.24 Kb