S
nt
er
Safety information
1.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.
2.If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)
3.When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.
CAUTION
1. | Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to |
|
| excessive vibrationor magnetic interference. |
|
2. | Do not install in a location subject to high temperature (over 50°C), low temperature (below | ENG |
| humidity. Doing so may cause fire or electric shock. | |
|
| |
3. | If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall |
|
| it. |
|
4. | Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or |
|
| damage to the product. |
|
5. | Keep out of direct sunlight and heat radiation sources. It may cause fire. |
|
6. | Install it in a place with good ventilation. |
|
7. | Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the |
|
| CCD image sensor. |
|
8. | Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, |
|
| shall be placed on the apparatus. |
|
9. | The Mains plug is used as a disconnect device and shall stay readily operable at any time. |
|
English – 3