Introduction
Components of your camera
Your camera has the following components:
13
2 |
| 5 | 4 |
|
| ||
|
|
| |
|
|
| 7 |
| 6 |
| 6 |
|
|
| |
|
| 7 |
|
8
Lens
9 10
11
1.Dome cover: Covers the inner cover, lens, and main body to protect them.
2.Cover screw: Use it to assemble or disassemble both dome cover and case.
3.Inner cover: Covers the main body to protect it.
4.Wing locker: Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover.
5.Main body: Includes a lens, a switch board, a PCB board, screws, and such.
6.Screws for assembly and disassembly: Using these 2 screws, the Main
body is closely connected to the Case.
7.Hooker: By pulling the left/right levers in the arrow direction, the Main body can be detached from the Case.
8.Case: Used as a ceiling or wall fixture. It is
fixed using four screws provided in the package.
9.Zoom lever: Using this lever, the lens zoom can be adjusted and fixed.
10.Focus lever: Using this lever, the lens focus can be adjusted and fixed.
11.Tilt fixing screw: Using this screw, the slope of the lens can be adjusted and fixed.
12.Cable: Connect the Video connector to BNC cable and Power connector to power adapter.
❖
•
12
Video connector
Power connector
8 – DIGITAL COLOR DOME CAMERA