How to use OSD Menu
Use the cdef switch to select one from PRIVACY 1 through 12.
Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position.
PRIVACY ZONE SET1
①By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.
②Use the cdef switch to move the position and press the SETUP switch to confirm it.
Note :
|
|
|
| – If more than one PRIVACY ZONE is specified and the |
PIXEL LEVEL | [4] |
|
| PRIVACY SET is set to ON, the PIP function will be |
|
| |||
<POINT> |
|
|
| deactivated. |
<POSITION> |
|
|
| |
|
|
|
|
|
|
|
|
| |||
- How to set the point
You can set each position of the 4 points.
①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.
②Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.
-How to set the position
You can move the position of the overall area.
–If the 12th PRIVACY ZONE is specified, the LINE function of FENCE will be deactivated.
OTHER SET
| eOTHER SETf |
|
|
| |
| EXTERNAL TRG | OFF |
FACTORY DEFAULTS | ||
OSD COLOR | BW | |
❖EXTERNAL TRG
Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen.
ENG |
English – 27