How to use OSD Menu
❖ FLICKERLESS | [OFF, ON] |
If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.
Note :
–If the SHUTTER menu is set to AUTO or FIX mode, the FLICKERLESS menu will not be available.
–If the
–If AGC is set to FIX mode, the FLICKERLESS function will be disabled.
❖XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH]
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.
Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation level.
❖ DAY/NIGHT | [DAY,NIGHT,AUTO,EXT] |
•DAY
If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.
•NIGHT
If set to NIGHT, it will be fixed to
If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output together with the
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
•AUTO
The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.
If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.
| AUTO |
|
BURST |
| OFF |
DAYÆNIGHT |
|
|
BRIGHTNESS |
| MID |
DWELL TIME |
| 2S |
NIGHTÆDAY |
|
|
BRIGHTNESS |
| MID |
DWELL TIME |
| 5S |
MASK AREA |
| 1 2 |
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
The BRIGHTNESS of DAYÆNIGHT sets the brightness degree of color to BW switching, for which you can select from LOW, MID, and
20 – DIGITAL COLOR DOME CAMERA