Axis Communications T90B40 IR-LED Installation Steps, Package Contents, Optional Accessories

Page 7

AXIS T90B Series

Installation Guide

This Installation Guide provides instructions for installing AXIS T90B Series.

Installation Steps

1.Make sure the package contents, tools and other materials necessary for the installation are in order. See page 7 .

2. Study the hardware overview. See page 8 .

3. Study the specifications. See page 14.

4. Install the hardware. See page 15.

Package Contents

•AXIS T90B Illuminator including power cable

•1 pre-mounted diverging lens

•2 separate diverging lenses

Optional Accessories

•Mounting brackets

•Remote control

•Diverging lens with additional angle

•Power supply

For information about available accessories, see www.axis.com

7

Image 7

Contents Axis T90B Series Electromagnetic Compatibility EMC Contact Information SafetyPhotobiological Safety Disposal and RecyclingPage Other Message Levels Hazard LevelsTransportation Safety InstructionsPackage Contents Installation StepsOptional Accessories Hardware Overview Axis T90B Series Axis T90B Series Remote Control Optional AccessoriesMounting Brackets LED Indicator Indicated Behavior LED IndicatorsOperating Conditions SpecificationsConnectors and Buttons Power ConsumptionInstall the Hardware Axis T90B Series Axis T90B Series Screws Diverging lens Axis T90B Series Programming Mode Access the ProductNormal Operating Mode Photocell Sensitivity Power AdjustTelemetry Input TTL input Volt-free inputTelemetry TEL Telemetry DIM TimerLED Status Indicators Factory Default TroubleshootingDisable Remote Control Setup Basics Set up Camera, Lens and IlluminationModels Technical SpecificationsType PowerAngle Distance Approvals CasingEnvironment MountingFurther Information WeightWarranty Information Page Installation Guide