Axis Communications T90B35 W-LED, T90B40 IR-LED manual Volt-free input, TTL input, Telemetry TEL

Page 24

AXIS T90B Series

Volt-free input:

Non polarity sensitive

 

Short circuit = Light on

 

 

TTL input:

Orange = TTL +ve

 

Purple = TTL -ve (GND)

 

0

V = Light on

 

3

V = Light off

 

 

 

The telemetry input wires (orange and purple) are soldered together when shipped from the factory to simulate a volt-free input so that the illuminator automatically turns on and off via the photocell. Any remote input or switch should be connected to these wires. Snip the end of the cable and separate the cables to use with remote switch or input.

Under normal operating conditions, a telemetry input will activate the unit only at night provided that the photocell detects low light conditions. However, if the photocell is disabled, a telemetry input will activate the unit regardless of ambient light conditions.

The mode of operation is selected by using the remote control.

The remote input can be used in conjunction with the illuminator in the following ways:

1.TEL — see page 24

2.DIM — see page 25

3.TEL + TIMER — see page 25

Telemetry - TEL

Press the TEL button if the illuminator is to be turned on and off using a remote switch or input.

The TEL input can be used in various ways:

24

Image 24
Contents Axis T90B Series Electromagnetic Compatibility EMC Safety Photobiological SafetyDisposal and Recycling Contact InformationPage Hazard Levels Other Message LevelsSafety Instructions TransportationInstallation Steps Package ContentsOptional Accessories Hardware Overview Axis T90B Series Axis T90B Series Optional Accessories Remote ControlMounting Brackets LED Indicators LED Indicator Indicated BehaviorSpecifications Connectors and ButtonsPower Consumption Operating ConditionsInstall the Hardware Axis T90B Series Axis T90B Series Screws Diverging lens Axis T90B Series Access the Product Programming ModeNormal Operating Mode Power Adjust Photocell SensitivityTelemetry Input Volt-free input TTL inputTelemetry TEL Timer Telemetry DIMLED Status Indicators Troubleshooting Factory DefaultDisable Remote Control Setup Set up Camera, Lens and Illumination BasicsTechnical Specifications ModelsPower TypeAngle Distance Casing EnvironmentMounting ApprovalsWeight Further InformationWarranty Information Page Installation Guide