AXIS T95A00/T95A10 Dome Housing | Page 9 |
Install the mounting bracket
Note:
Make sure all cables are in place but not powered, before you install the bracket. Keep cables unpowered until the installation is complete.
1.Install the bracket for the AXIS T95A00/T95A10 Dome Housing on a wall and make sure that the screws and plugs are appropriate for the wall (wood, metal, concrete, or any other), and suitable for the weight of the housing. To install the bracket in the correct direction, see figure below.
70 31
230 | 140 |
| 110 |
14 | 77 |
182 | 150 |
ENGLISH
81
14
9
2.Pull a sufficient length of the cables through the bracket for the housing and camera (approximately 50 cm).
Note:
Visit the Axis web site at www.axis.com for a comprehensive list of the available brackets and accessories.