Axis Communications Q6042 PTZ user manual Events

Page 38

AXIS Q6042 PTZ Dome Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

Applications — use installed applications to trigger the rule, see Applications, on page 36.

Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 34.

-Live Stream Accessed — trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 33.

Hardware

-Fan — trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance notifications.

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 54.

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 11. This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs — can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

PTZ

-Autotracking — trigger the rule when autotracking starts or stops, see Autotracking, on page 29.

-Error — trigger the rule if the PTZ functionality is not working correctly. This can for example be used to send maintenance notifications.

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

-Ready — trigger the rule when the PTZ functionality is ready to be used. This can for example be used to steer the camera to a specific preset position when the product is started.

Storage

-Disruption — trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

38

Image 38
Contents Axis Q6042 PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6042 PTZ Dome Network CameraTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewPower Button LED IndicatorsMulti-connector SD Card SlotHardware Overview Midspan LED Indicators Access from a Browser Accessing the ProductAccessing the Product Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Controls on the Live View Go to Setup EventsLive View Manual TriggerAxis Media Control viewer toolbar AMC Audio ControlsPTZ Controls Tour Recording, onMedia Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Basic Setup Setting Up the ProductSetting Up the Product Video Stream Video and AudioVideo and Audio Pixel Counter264 Stream ProfilesImage Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video & Audio Video Stream and select the Image tabGo to Video & Audio Overlay Image Using Overlay Text in an Action RulePrivacy Mask Go to Events Action RulesAudio Input Audio SettingsAudio Modes Audio Clips Audio OutputDefault Viewer for Browsers Live View ConfigLive View Config User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis Q6042 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAutotracking ConfigurationPTZ Pan Tilt Zoom Gatekeeper Exclude AreasGuard Tour Tour RecordingLimits Osdi ZonesAdvanced Control Queue ControlsDetectors Set Up Motion Detection WindowsDetectors Shock DetectionAudio Detection Motion Detection ParametersAxis Q6042 PTZ Dome Network Camera Applications Install ApplicationApplications Application LicensesAxis Q6042 PTZ Dome Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsFallback Action Go to Events Recipients and click Add Setting Up an Email RecipientSchedules Go to Events Schedules and click AddEvents Recurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersGo to System Options Security Ieee IeeeCertificates Go to System Options Security Certificates Date & TimeAudio Support Basic TCP/IP Settings System Options NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM SD Card StorageBonjour Network SharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Function Pin Specifications Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately Connector Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Settings Video and image problems, generalSetup Video & Audio Camera Settings Storage and disk management problemsCondensation in dome Technical Specifications Technical SpecificationsMaintenance Function/group Specifications Network SecurityInstallation aid PowerPerformance Considerations Axis Q6042 PTZ Dome Network Camera M2.2
Related manuals
Manual 68 pages 6.91 Kb

Q6042 PTZ specifications

The Axis Communications Q6042 PTZ is a sophisticated network camera designed for demanding surveillance environments. Known for its high-resolution imaging and advanced features, this camera is an ideal choice for monitoring large areas such as city centers, airports, and parking lots.

One of the standout features of the Q6042 is its 1080p resolution, offering crisp, detailed video quality. The camera supports H.264 compression technology, which minimizes bandwidth use and storage requirements without sacrificing image quality. This makes it very efficient for users looking to maintain high video fidelity while maximizing their network and storage capacity.

Another key characteristic of the Q6042 is its 18x optical zoom, enabling operators to zoom in on distant subjects without blurring the image. Combined with its advanced pan and tilt capabilities—offering a 360-degree continuous rotation and a tilt range of -20 to +90 degrees—the PTZ camera can cover vast areas and track moving objects with ease. This functionality is particularly useful for security personnel who need to monitor dynamic environments.

The Q6042 is also equipped with Axis' Wide Dynamic Range (WDR) technology, which enhances the camera's ability to capture clear images in challenging lighting conditions. This feature is vital when monitoring areas that experience significant contrasts in light, such as entrances and exits.

The camera is built for durability and features an IP66-rated weatherproof housing, protecting it from dust and heavy rain. It is also resistant to vandalism, making it suitable for outdoor installations where security is a prime concern.

Integrated with Axis’ Corridor Format technology, the Q6042 can be configured to monitor tall and narrow areas, optimizing the field of view for situations like hallways or alleys. This maximizes the effectiveness of surveillance and reduces the amount of unnecessary data captured.

Moreover, the Q6042 supports various network protocols and can be seamlessly integrated with other security systems. With its built-in analytics capabilities, the camera can be equipped with features such as motion detection and audio detection, allowing users to receive alerts based on specific events.

In summary, the Axis Communications Q6042 PTZ camera offers a robust solution for high-security surveillance needs, equipped with high-resolution video, extensive zoom capabilities, and advanced analytics, making it a versatile tool for modern security applications.