Axis Communications Q6042 PTZ LED Indicators, Multi-connector, SD Card Slot, Control Button

Page 7

AXIS Q6042 PTZ Dome Network Camera

Hardware Overview

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the midspan shall be shielded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. For information about regulatory requirements, see Regulatory Information, on page 2 .

Multi-connector

Terminal connector for connecting external equipment:

Audio equipment

Input/Output (I/O) devices

AC/DC power supply

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating. For more information, see Multi-Connector Cable (sold separately), on page 57.

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

Resetting the product to factory default settings. See page 56.

Connecting to an AXIS Video Hosting System service. See page 49. To connect, press and hold the button for about 1 second until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 49. To connect, press and hold the button for about 3 seconds.

Power Button

Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used with the control button to reset the camera to factory default settings. See page 56.

LED Indicators

LED

Color

Indication

 

 

 

Status

Unlit

Connection and normal operation

 

 

 

 

Amber

Steady during startup. Flashes during firmware upgrade.

 

 

 

 

Amber/red

Flashes amber/red if network connection is unavailable or lost.

 

 

 

 

Red

Flashes red for firmware upgrade failure.

 

 

 

 

Green

Shows steady green for 10 seconds for normal operation after restart.

 

 

 

7

Image 7
Contents Axis Q6042 PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6042 PTZ Dome Network Camera Table of ContentsTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewSD Card Slot LED IndicatorsMulti-connector Power ButtonHardware Overview Midspan LED Indicators Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Manual Trigger Go to Setup EventsLive View Controls on the Live ViewAMC Audio Controls Axis Media Control viewer toolbarTour Recording, on PTZ ControlsAxis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter Video and AudioVideo and Audio Video StreamImage Stream Profiles264 White Balance Camera SettingsExposure Settings Image AppearanceGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Go to Video & Audio Overlay ImageAudio Modes Audio SettingsAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis Q6042 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomExclude Areas ConfigurationPTZ Pan Tilt Zoom Gatekeeper AutotrackingTour Recording Guard TourAdvanced Osdi ZonesLimits Controls Control QueueShock Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionAxis Q6042 PTZ Dome Network Camera Application Licenses Install ApplicationApplications ApplicationsAxis Q6042 PTZ Dome Network Camera Events EventsPTZ Control Setting Up an Action RuleSystem TimeFallback Action RecipientsRecipient Use with action Go to Events Schedules and click Add Setting Up an Email RecipientSchedules Go to Events Recipients and click AddGo to Events Recurrences and click Add Events RecurrencesContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Audio Support Date & TimeGo to System Options Security Certificates System Options Network Basic TCP/IP SettingsAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Network Share StorageBonjour SD CardPort Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsFile Upload Multi-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Video and image problems, generalSetup Video & Audio Camera Settings SettingsCondensation in dome Technical Specifications Technical SpecificationsPower Function/group Specifications Network SecurityInstallation aid MaintenancePerformance Considerations Axis Q6042 PTZ Dome Network Camera M2.2
Related manuals
Manual 68 pages 6.91 Kb

Q6042 PTZ specifications

The Axis Communications Q6042 PTZ is a sophisticated network camera designed for demanding surveillance environments. Known for its high-resolution imaging and advanced features, this camera is an ideal choice for monitoring large areas such as city centers, airports, and parking lots.

One of the standout features of the Q6042 is its 1080p resolution, offering crisp, detailed video quality. The camera supports H.264 compression technology, which minimizes bandwidth use and storage requirements without sacrificing image quality. This makes it very efficient for users looking to maintain high video fidelity while maximizing their network and storage capacity.

Another key characteristic of the Q6042 is its 18x optical zoom, enabling operators to zoom in on distant subjects without blurring the image. Combined with its advanced pan and tilt capabilities—offering a 360-degree continuous rotation and a tilt range of -20 to +90 degrees—the PTZ camera can cover vast areas and track moving objects with ease. This functionality is particularly useful for security personnel who need to monitor dynamic environments.

The Q6042 is also equipped with Axis' Wide Dynamic Range (WDR) technology, which enhances the camera's ability to capture clear images in challenging lighting conditions. This feature is vital when monitoring areas that experience significant contrasts in light, such as entrances and exits.

The camera is built for durability and features an IP66-rated weatherproof housing, protecting it from dust and heavy rain. It is also resistant to vandalism, making it suitable for outdoor installations where security is a prime concern.

Integrated with Axis’ Corridor Format technology, the Q6042 can be configured to monitor tall and narrow areas, optimizing the field of view for situations like hallways or alleys. This maximizes the effectiveness of surveillance and reduces the amount of unnecessary data captured.

Moreover, the Q6042 supports various network protocols and can be seamlessly integrated with other security systems. With its built-in analytics capabilities, the camera can be equipped with features such as motion detection and audio detection, allowing users to receive alerts based on specific events.

In summary, the Axis Communications Q6042 PTZ camera offers a robust solution for high-security surveillance needs, equipped with high-resolution video, extensive zoom capabilities, and advanced analytics, making it a versatile tool for modern security applications.