Axis Communications Q6042 PTZ NTP Configuration, Host Name Configuration, Link-Local IPv4 Address

Page 50

AXIS Q6042 PTZ Dome Network Camera

System Options

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see HTTPS, on page 45.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product.

NAT traversal is configured under System Options > Network > TCP/IP > Advanced.

Note

For NAT traversal to work, this must be supported by the router. The router must also support UPnPTM.

The router has many different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

50

Image 50
Contents Axis Q6042 PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6042 PTZ Dome Network CameraTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewPower Button LED IndicatorsMulti-connector SD Card SlotHardware Overview Midspan LED Indicators Access from a Browser Accessing the ProductAccessing the Product Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Controls on the Live View Go to Setup EventsLive View Manual TriggerAxis Media Control viewer toolbar AMC Audio ControlsPTZ Controls Tour Recording, onMedia Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Basic Setup Setting Up the ProductSetting Up the Product Video Stream Video and AudioVideo and Audio Pixel Counter264 Stream ProfilesImage Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video & Audio Video Stream and select the Image tabGo to Video & Audio Overlay Image Using Overlay Text in an Action RulePrivacy Mask Go to Events Action RulesAudio Input Audio SettingsAudio Modes Audio Clips Audio OutputDefault Viewer for Browsers Live View ConfigLive View Config User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis Q6042 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAutotracking ConfigurationPTZ Pan Tilt Zoom Gatekeeper Exclude AreasGuard Tour Tour RecordingLimits Osdi ZonesAdvanced Control Queue ControlsDetectors Set Up Motion Detection WindowsDetectors Shock DetectionAudio Detection Motion Detection ParametersAxis Q6042 PTZ Dome Network Camera Applications Install ApplicationApplications Application LicensesAxis Q6042 PTZ Dome Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsFallback Action Go to Events Recipients and click Add Setting Up an Email RecipientSchedules Go to Events Schedules and click AddEvents Recurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersGo to System Options Security Ieee IeeeCertificates Go to System Options Security Certificates Date & TimeAudio Support Basic TCP/IP Settings System Options NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM SD Card StorageBonjour Network SharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Function Pin Specifications Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately Connector Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Settings Video and image problems, generalSetup Video & Audio Camera Settings Storage and disk management problemsCondensation in dome Technical Specifications Technical SpecificationsMaintenance Function/group Specifications Network SecurityInstallation aid PowerPerformance Considerations Axis Q6042 PTZ Dome Network Camera M2.2
Related manuals
Manual 68 pages 6.91 Kb

Q6042 PTZ specifications

The Axis Communications Q6042 PTZ is a sophisticated network camera designed for demanding surveillance environments. Known for its high-resolution imaging and advanced features, this camera is an ideal choice for monitoring large areas such as city centers, airports, and parking lots.

One of the standout features of the Q6042 is its 1080p resolution, offering crisp, detailed video quality. The camera supports H.264 compression technology, which minimizes bandwidth use and storage requirements without sacrificing image quality. This makes it very efficient for users looking to maintain high video fidelity while maximizing their network and storage capacity.

Another key characteristic of the Q6042 is its 18x optical zoom, enabling operators to zoom in on distant subjects without blurring the image. Combined with its advanced pan and tilt capabilities—offering a 360-degree continuous rotation and a tilt range of -20 to +90 degrees—the PTZ camera can cover vast areas and track moving objects with ease. This functionality is particularly useful for security personnel who need to monitor dynamic environments.

The Q6042 is also equipped with Axis' Wide Dynamic Range (WDR) technology, which enhances the camera's ability to capture clear images in challenging lighting conditions. This feature is vital when monitoring areas that experience significant contrasts in light, such as entrances and exits.

The camera is built for durability and features an IP66-rated weatherproof housing, protecting it from dust and heavy rain. It is also resistant to vandalism, making it suitable for outdoor installations where security is a prime concern.

Integrated with Axis’ Corridor Format technology, the Q6042 can be configured to monitor tall and narrow areas, optimizing the field of view for situations like hallways or alleys. This maximizes the effectiveness of surveillance and reduces the amount of unnecessary data captured.

Moreover, the Q6042 supports various network protocols and can be seamlessly integrated with other security systems. With its built-in analytics capabilities, the camera can be equipped with features such as motion detection and audio detection, allowing users to receive alerts based on specific events.

In summary, the Axis Communications Q6042 PTZ camera offers a robust solution for high-security surveillance needs, equipped with high-resolution video, extensive zoom capabilities, and advanced analytics, making it a versatile tool for modern security applications.