Axis Communications P5532E user manual Detectors, Set Up Motion Detection Windows

Page 28

AXIS P5532–E PTZ Dome Network Camera

Detectors

Detectors

Motion Detection

Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.

Motion detection is configured by defining up to 10 Include and Exclude windows:

Include windows — define areas where motion should be detected

Exclude windows — define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored).

For instructions, see Set Up Motion Detection Windows on page 28.

To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See Motion Detection Parameters on page 28.

Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected. Possible actions include uploading images and start recording. For more information, see Set Up Action Rules on page 32.

Note

Using the motion detection feature may decrease the product’s overall performance.

The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

4.Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detected motion within an active window is indicated by red peaks in the Activity window.

5.Click Save.

To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the include window.

To delete an include or exclude window, select the window in the list of windows and click Del.

Motion Detection Parameters

The parameters controlling motion detection are described in the table below:

Parameter

Object Size

History

Sensitivity

 

 

 

 

Description

Object size relative to window

Object memory length.

Difference in luminance

 

size.

 

between background and

 

 

 

object.

 

 

 

 

28

Image 28
Contents Axis P5532-E PTZ Dome Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreHazard Levels Safety InformationOther Message Levels Table of Contents Symptoms, Possible Causes and Remedial Actions Performance ConsiderationsConnectors and Buttons Network ConnectorFor technical specifications, see Hardware OverviewLED Indicators Midspan LED IndicatorsSD Card Slot Control ButtonAccess from a Browser Access the ProductAccess from the Internet Live View Set the Root PasswordClick Create self-signed certificate Go to Setup Events Controls on the Live ViewAxis Media Control viewer toolbar Manual TriggerPTZ Controls Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P5532-E PTZ Dome Network Camera Set Up the Product Basic SetupSet Up Video Streams Click Save to apply the new settingsVideo Pixel CounterStream Profiles 264Camera Settings Exposure SettingsImage Appearance White BalanceImage Settings Date/Time Formats in the online help To enable overlaysOverlay Overlay ImagePrivacy Mask Go to Video Overlay ImageConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons PTZ Pan Tilt Zoom Preset PositionsGatekeeper Guard Tour Osdi ZonesAdvanced LimitsControls Operator Same as administrator but with lower priority Control QueueSet Up Motion Detection Windows DetectorsMotion Detection Motion Detection ParametersDefault values High level 100%Medium level 50% Low level 0%Install Application Go to Setup ApplicationsApplications Application LicensesAxis P5532-E PTZ Dome Network Camera Set Up Action Rules EventsConvert Event Types to Action Rules Go to Events Action Rules and click AddTriggers ActionsCreate Schedules Add RecipientsRecipient Types Set Up Recurrences Go to Events Recurrences and click AddRecordings Recording ListContinuous Recording Go to Recordings ListTo log in again and be configured to use this functionality System OptionsSecurity UsersDate & Time IeeeCertificates CA CertificateBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4Linux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPQoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMStorage RTP/H.264Bonjour SD CardMaintenance Network ShareFormat SD Card Go to System Options Storage Click Network ShareSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadAxis P5532-E PTZ Dome Network Camera Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Condensation in domeTechnical Specifications Function/group Specifications System Application Maintenance Installation aidsMemory Power ConnectorsFunction/group Specifications Video Performance ConsiderationsM3.2