Axis Communications P8524 Advanced TCP/IP Settings, DNS Configuration, NTP Configuration

Page 37

AXIS P8524 Network Camera

System Options

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see HTTPS on page 33

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Axis P8524 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P8524 Network Camera Table of ContentsShorten Sensor Unit Cable Hardware OverviewNetwork Connector Connectors and ButtonsConnector For technical specifications, seePower Connector LED IndicatorsSD Card Slot Control ButtonAccess from a Browser Access the ProductAccess from the Internet Set Power Line Frequency Set the Root PasswordClick Create self-signed certificate Live View Go to Setup EventsControls on the Live View Manual TriggerAxis Media Control viewer toolbar Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P8524 Network Camera Basic Setup Set Up the ProductVideo Set Up Video StreamsPixel Counter ImageStream Profiles Click Save to apply the new settings264 Exposure Settings Camera SettingsOverlay Image AppearanceGo to Video Overlay Image Overlay ImagePrivacy Mask Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P8524 Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P8524 Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddActions TriggersAdd Recipients Set Up RecurrencesCreate Schedules Recipient TypesGo to Events Recurrences and click Add Recording List RecordingsContinuous Recording Go to Recordings ListSystem Options To log in again and be configured to use this functionalitySecurity UsersIeee Date & TimeCertificates CA CertificateNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 Axis Internet Dynamic DNS ServiceLinux/Unix syntax Linux/Unix exampleDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceSmtp email UPnPTMRTP/H.264 StorageBonjour SD CardClick Unmount Card can now be removed Network ShareFormat SD Card To add a network sharePorts & Devices MaintenanceSupport System Overview AdvancedLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsUpgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Video Camera SettingsStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Installation aids General Casing Function/group Specifications System ApplicationPower ConnectorsSoftware Warranty ConnectorsFunction Pin Specifications ManagementPerformance Considerations Pin terminal block for power inputAxis P8524 Network Camera Ver M3.13 Axis P8524 Network Camera
Top Page Image Contents