Axis Communications P8524 LED Indicators, Power Connector, SD Card Slot, Control Button

Page 7

AXIS P8524 Network Camera

Hardware Overview

Power Connector

2-pin terminal block for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a rated output power limited to 100 W or a rated output current limited to 5 A.

SD Card Slot

NOTICE

Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card.

Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

This product supports microSD/microSDHC/microSDXC card (not included).

For SD card recommendations, see www.axis.com

Control Button

For location of the control button, see Hardware Overview on page 5 .

The control button is used for:

Resetting the product to factory default settings. See page 44.

Connecting to an AXIS Video Hosting System service. See page 36. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 36. To connect, press and hold the button for about 3 seconds.

LED Indicators

Note

The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

Status LED

Indication

 

 

Green

Steady green for normal operation.

 

 

Amber

Steady during startup and when restoring settings.

 

 

Red

Flashes red for firmware upgrade failure.

 

 

Network LED

Indication

 

 

Green

Steady for connection to a 100 Mbit/s network. Flashes for network activity.

 

 

Amber

Steady for connection to a 10 Mbit/s network. Flashes for network activity.

 

 

Unlit

No network connection.

 

 

Power LED

Indication

 

 

Green

Normal operation.

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

7

Image 7
Contents Axis P8524 Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P8524 Network Camera Table of ContentsShorten Sensor Unit Cable Hardware OverviewFor technical specifications, see Connectors and ButtonsNetwork Connector ConnectorControl Button LED IndicatorsPower Connector SD Card SlotAccess from a Browser Access the ProductAccess from the Internet Set Power Line Frequency Set the Root PasswordClick Create self-signed certificate Manual Trigger Go to Setup EventsLive View Controls on the Live ViewAxis Media Control viewer toolbar Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P8524 Network Camera Basic Setup Set Up the ProductImage Set Up Video StreamsVideo Pixel CounterStream Profiles Click Save to apply the new settings264 Image Appearance Camera SettingsExposure Settings OverlayGo to Video Overlay Image Overlay ImagePrivacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis P8524 Network Camera Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P8524 Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesActions TriggersRecipient Types Set Up RecurrencesAdd Recipients Create SchedulesGo to Events Recurrences and click Add Go to Recordings List RecordingsRecording List Continuous RecordingUsers To log in again and be configured to use this functionalitySystem Options SecurityCA Certificate Date & TimeIeee CertificatesNetwork Basic TCP/IP SettingsLinux/Unix example Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 Linux/Unix syntaxHost Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM Smtp emailSD Card StorageRTP/H.264 BonjourTo add a network share Network ShareClick Unmount Card can now be removed Format SD CardPorts & Devices MaintenanceSupport Scripting AdvancedSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserVideo Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Connectors Function/group Specifications System ApplicationInstallation aids General Casing PowerManagement ConnectorsSoftware Warranty Function Pin SpecificationsPerformance Considerations Pin terminal block for power inputAxis P8524 Network Camera Ver M3.13 Axis P8524 Network Camera