Axis Communications P8524 user manual Triggers, Actions

Page 29

AXIS P8524 Network Camera

Events

For more information, see the online help .

Triggers

Available action rule triggers and conditions include:

Applications – Use installed applications to trigger the rule. See Applications on page 26.

Detectors

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 23.

-Tampering – Trigger the rule when tampering is detected. See Camera Tampering on page 23.

Hardware

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

Input Signal

-Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. See I/O Ports on page 42.

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 10. This can for example be used to validate actions during product installation and configuration.

Storage

-Available – Trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full – Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked – Trigger the rule if the storage device is locked (write protected).

System

-System Initializing – Trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

Time

-Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 30. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 30.

Actions

Available actions include:

Output Port – Activate an I/O port to control an external device.

Record Video – Record video to a selected storage.

Send Images – Send images to a recipient.

Send Notifications – Send a notification message to a recipient.

29

Image 29
Contents Axis P8524 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P8524 Network Camera Table of ContentsShorten Sensor Unit Cable Hardware OverviewNetwork Connector Connectors and ButtonsConnector For technical specifications, seePower Connector LED IndicatorsSD Card Slot Control ButtonAccess from the Internet Access the ProductAccess from a Browser Click Create self-signed certificate Set the Root PasswordSet Power Line Frequency Live View Go to Setup EventsControls on the Live View Manual TriggerAxis Media Control viewer toolbar Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P8524 Network Camera Basic Setup Set Up the ProductVideo Set Up Video StreamsPixel Counter Image264 Click Save to apply the new settingsStream Profiles Exposure Settings Camera SettingsOverlay Image AppearanceGo to Video Overlay Image Overlay ImagePrivacy Mask Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P8524 Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P8524 Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddActions TriggersAdd Recipients Set Up RecurrencesCreate Schedules Recipient TypesGo to Events Recurrences and click Add Recording List RecordingsContinuous Recording Go to Recordings ListSystem Options To log in again and be configured to use this functionalitySecurity UsersIeee Date & TimeCertificates CA CertificateNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 Axis Internet Dynamic DNS ServiceLinux/Unix syntax Linux/Unix exampleDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceSmtp email UPnPTMRTP/H.264 StorageBonjour SD CardClick Unmount Card can now be removed Network ShareFormat SD Card To add a network shareSupport MaintenancePorts & Devices System Overview AdvancedLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsUpgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Video Camera SettingsStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Installation aids General Casing Function/group Specifications System ApplicationPower ConnectorsSoftware Warranty ConnectorsFunction Pin Specifications ManagementPerformance Considerations Pin terminal block for power inputAxis P8524 Network Camera Ver M3.13 Axis P8524 Network Camera