Axis Communications P3915-R user manual Events

Page 34

AXIS P3915–R Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

•Applications – Use installed applications to trigger the rule. See Applications on page 32.

•Detectors

-Audio Detection – Trigger the rule when audio is detected. See Audio Detection on page 31.

-Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 29.

-Tampering – Trigger the rule when tampering is detected. See Camera Tampering on page 29.

•Hardware

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. See I/O Ports on page 49.

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 10. This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

•PTZ

-Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached – Trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

-Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.

•System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis P3915-R Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3915-R Network CameraConnectors Performance Considerations For technical specifications, see Connectors and ButtonsNetwork Connector Hardware OverviewAudio Connector LED IndicatorsConnector SD Card SlotAxis P3915-R Network Camera Access from the Internet Accessing the ProductAccess from a Browser Set the Root PasswordControls on the Live View Set Power Line FrequencyLive View Click Use HttpsPTZ Controls Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAxis P3915-R Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3915-R Network Camera Setting Up the Product Basic SetupPixel Counter Video and AudioVideo Stream ImageStream Profiles Click Save to apply the new settings264 Camera Settings Set Shutter to View AreaShutter & Gain To add a new view areaOverlay Image Select an Aspect ratio and a Video stream resolutionOverlay Go to Video & Audio Video Stream and select the Image tabGo to Video & Audio Overlay Image Using Overlay Text in an Action RuleGo to Events Action Rules Privacy Mask Audio SettingsAudio Input Axis P3915-R Network Camera Viewer Settings Live View ConfigDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourControl Queue Operator Same as administrator but with lower priorityAdvanced ControlsMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionApplications Install ApplicationGo to Setup Applications Application LicensesAxis P3915-R Network Camera Events PTZ Control Setting Up an Action RuleTime Go to Events Action Rules and click AddRecipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddAxis P3915-R Network Camera Continuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterDate & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate CertificatesIPv6 Address Configuration Basic TCP/IP SettingsIPv4 Address Configuration NetworkLinux/Unix example Assign IP Address Using ARP/PingLinux/Unix syntax Axis Video Hosting System AvhsAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service SocksRTP/H.264 StorageUPnPTM BonjourNetwork Share MaintenancePorts & Devices PortsSystem Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsPlain Config File UploadAxis P3915-R Network Camera Checking the Firmware TroubleshootingEmergency Recovery Procedure Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Key framesNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Installation Function/group Specifications Network SecurityAlarm actions Maintenance General CasingConnectors Performance Considerations M2.2

P3915-R specifications

The Axis Communications P3915-R is a robust and versatile network camera designed specifically for demanding surveillance environments. This camera model is part of the Axis P39 series, which is renowned for its exceptional durability and performance in various conditions. Engineered for outdoor use, the P3915-R is particularly suitable for locations that require reliable, high-quality video monitoring, such as transportation hubs, airports, and public areas.

One of the standout features of the P3915-R is its IP66 and IK10 ratings, which make it resistant to both water and vandalism. This rugged construction ensures the camera can withstand harsh weather conditions, including rain and extreme temperatures, while also being capable of enduring impacts from potential vandalism. The built-in heater and fan further enhance its performance in varying outdoor temperatures, enabling the camera to operate effectively in both hot and cold climates.

In terms of video quality, the P3915-R supports 1080p resolution at up to 30 frames per second, ensuring clear and detailed images even in low-light situations. The camera is equipped with advanced imaging technologies, including Wide Dynamic Range (WDR) Forensic Capture, which improves visibility in scenes with varying lighting conditions. This feature is vital for capturing critical details in high-contrast environments.

Another technological enhancement is Axis’ Zipstream technology, which optimizes bandwidth and storage usage without compromising image quality. By significantly compressing video data while retaining the essential details for forensic purposes, Zipstream aids in efficient storage management and reduces costs associated with data transmission.

The P3915-R also supports various video analytics capabilities, including motion detection and automatic tracking, which can be customized to meet specific security needs. With two-way audio support, the camera allows for interactive communication, making it a versatile tool for real-time monitoring and response.

Flexible installation options are another significant characteristic of the P3915-R. Its robust design allows for easy mounting on walls or ceilings, and given its compact size, it can fit into tight spaces seamlessly. Overall, the Axis Communications P3915-R combines advanced imaging, robust durability, efficient data management, and flexible installation options, making it a preferred choice for security professionals seeking reliable surveillance solutions in demanding environments.
Top Page Image Contents