Axis Communications P3915-R user manual Storage, UPnPTM, RTP/H.264, Bonjour, SD Card

Page 48

AXIS P3915–R Network Camera

System Options

UPnPTM

The Axis product includes support for UPnPTM. UPnPTM is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

UPnPTM can be disabled under System Options > Network > UPnPTM.

RTP/H.264

The RTP port range and multicast settings are configured under System Options > Network > RTP.

The RTP port range defines the range of ports from which the video/audio ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video and/or Always Multicast Audio to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD Card

Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 10.

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following file systems:

ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

vFAT — supported by most operating systems for personal computers.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

3.The card can now be removed.

48

Image 48
Contents Axis P3915-R Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3915-R Network CameraConnectors Performance Considerations Connectors and Buttons Network ConnectorFor technical specifications, see Hardware OverviewLED Indicators ConnectorAudio Connector SD Card SlotAxis P3915-R Network Camera Accessing the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Live ViewControls on the Live View Click Use HttpsGo to Setup Events Axis Media Control viewer toolbarPTZ Controls Manual TriggerAxis P3915-R Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3915-R Network Camera Setting Up the Product Basic SetupVideo and Audio Video StreamPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Camera Settings View Area Shutter & GainSet Shutter to To add a new view areaSelect an Aspect ratio and a Video stream resolution OverlayOverlay Image Go to Video & Audio Video Stream and select the Image tabUsing Overlay Text in an Action Rule Go to Video & Audio Overlay ImageGo to Events Action Rules Audio Settings Privacy MaskAudio Input Axis P3915-R Network Camera Live View Config Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourOperator Same as administrator but with lower priority AdvancedControl Queue ControlsDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionInstall Application Go to Setup ApplicationsApplications Application LicensesAxis P3915-R Network Camera Events Setting Up an Action Rule TimePTZ Control Go to Events Action Rules and click AddRecipients Fallback ActionRecipient Use with action Go to Events Recipients and click AddSetting Up an Email Recipient SchedulesRecurrences Go to Events Schedules and click AddAxis P3915-R Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterGo to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time CertificatesBasic TCP/IP Settings IPv4 Address ConfigurationIPv6 Address Configuration NetworkAssign IP Address Using ARP/Ping Linux/Unix syntaxLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service SocksStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadAxis P3915-R Network Camera Troubleshooting Emergency Recovery ProcedureChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings Key framesSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Network Security Alarm actionsInstallation Maintenance General CasingConnectors Performance Considerations M2.2

P3915-R specifications

The Axis Communications P3915-R is a robust and versatile network camera designed specifically for demanding surveillance environments. This camera model is part of the Axis P39 series, which is renowned for its exceptional durability and performance in various conditions. Engineered for outdoor use, the P3915-R is particularly suitable for locations that require reliable, high-quality video monitoring, such as transportation hubs, airports, and public areas.

One of the standout features of the P3915-R is its IP66 and IK10 ratings, which make it resistant to both water and vandalism. This rugged construction ensures the camera can withstand harsh weather conditions, including rain and extreme temperatures, while also being capable of enduring impacts from potential vandalism. The built-in heater and fan further enhance its performance in varying outdoor temperatures, enabling the camera to operate effectively in both hot and cold climates.

In terms of video quality, the P3915-R supports 1080p resolution at up to 30 frames per second, ensuring clear and detailed images even in low-light situations. The camera is equipped with advanced imaging technologies, including Wide Dynamic Range (WDR) Forensic Capture, which improves visibility in scenes with varying lighting conditions. This feature is vital for capturing critical details in high-contrast environments.

Another technological enhancement is Axis’ Zipstream technology, which optimizes bandwidth and storage usage without compromising image quality. By significantly compressing video data while retaining the essential details for forensic purposes, Zipstream aids in efficient storage management and reduces costs associated with data transmission.

The P3915-R also supports various video analytics capabilities, including motion detection and automatic tracking, which can be customized to meet specific security needs. With two-way audio support, the camera allows for interactive communication, making it a versatile tool for real-time monitoring and response.

Flexible installation options are another significant characteristic of the P3915-R. Its robust design allows for easy mounting on walls or ceilings, and given its compact size, it can fit into tight spaces seamlessly. Overall, the Axis Communications P3915-R combines advanced imaging, robust durability, efficient data management, and flexible installation options, making it a preferred choice for security professionals seeking reliable surveillance solutions in demanding environments.