Axis Communications P3915-R user manual Socks, QoS Quality of Service

Page 47

AXIS P3915–R Network Camera

System Options

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, live audio, event/alarm traffic and management traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2 provides the lowest level of security. The community name can be specified as a password for read or read/write access to all supported SNMP devices. The default password for the Read community is public and the default password for the Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

The following traps are available:

•Cold start

•Warm start

•Link up

•Authentication failed

SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see HTTPS on page 41. To enable SNMP v3, check the box and provide the initial user password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to Factory Default Settings on page 51.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Axis P3915-R Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P3915-R Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeSD Card Slot LED IndicatorsConnector Audio ConnectorAxis P3915-R Network Camera Set the Root Password Accessing the ProductAccess from a Browser Access from the InternetClick Use Https Set Power Line FrequencyLive View Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ ControlsAxis P3915-R Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P3915-R Network Camera Basic Setup Setting Up the ProductImage Video and AudioVideo Stream Pixel Counter264 Click Save to apply the new settingsStream Profiles Camera Settings To add a new view area View AreaShutter & Gain Set Shutter toGo to Video & Audio Video Stream and select the Image tab Select an Aspect ratio and a Video stream resolutionOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RuleGo to Video & Audio Overlay Image Audio Input Audio SettingsPrivacy Mask Axis P3915-R Network Camera Browser Viewer Description Live View ConfigDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsGuard Tour Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls Operator Same as administrator but with lower priorityAdvanced Control QueueGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Audio Detection Audio DetectionApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P3915-R Network Camera Events Go to Events Action Rules and click Add Setting Up an Action RuleTime PTZ ControlGo to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesAxis P3915-R Network Camera Go to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersCertificates Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAxis Video Hosting System Avhs Assign IP Address Using ARP/PingLinux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSocks QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis P3915-R Network Camera Upgrading the Firmware TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Key frames Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Maintenance General Casing Function/group Specifications Network SecurityAlarm actions InstallationConnectors Performance Considerations M2.2

P3915-R specifications

The Axis Communications P3915-R is a robust and versatile network camera designed specifically for demanding surveillance environments. This camera model is part of the Axis P39 series, which is renowned for its exceptional durability and performance in various conditions. Engineered for outdoor use, the P3915-R is particularly suitable for locations that require reliable, high-quality video monitoring, such as transportation hubs, airports, and public areas.

One of the standout features of the P3915-R is its IP66 and IK10 ratings, which make it resistant to both water and vandalism. This rugged construction ensures the camera can withstand harsh weather conditions, including rain and extreme temperatures, while also being capable of enduring impacts from potential vandalism. The built-in heater and fan further enhance its performance in varying outdoor temperatures, enabling the camera to operate effectively in both hot and cold climates.

In terms of video quality, the P3915-R supports 1080p resolution at up to 30 frames per second, ensuring clear and detailed images even in low-light situations. The camera is equipped with advanced imaging technologies, including Wide Dynamic Range (WDR) Forensic Capture, which improves visibility in scenes with varying lighting conditions. This feature is vital for capturing critical details in high-contrast environments.

Another technological enhancement is Axis’ Zipstream technology, which optimizes bandwidth and storage usage without compromising image quality. By significantly compressing video data while retaining the essential details for forensic purposes, Zipstream aids in efficient storage management and reduces costs associated with data transmission.

The P3915-R also supports various video analytics capabilities, including motion detection and automatic tracking, which can be customized to meet specific security needs. With two-way audio support, the camera allows for interactive communication, making it a versatile tool for real-time monitoring and response.

Flexible installation options are another significant characteristic of the P3915-R. Its robust design allows for easy mounting on walls or ceilings, and given its compact size, it can fit into tight spaces seamlessly. Overall, the Axis Communications P3915-R combines advanced imaging, robust durability, efficient data management, and flexible installation options, making it a preferred choice for security professionals seeking reliable surveillance solutions in demanding environments.
Top Page Image Contents