Axis Communications P3346-V user manual Axis Media Control viewer toolbar, Go to Setup Events

Page 11

AXIS P3346-V Fixed Dome Network Camera

Accessing the Product

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events on page 36.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Config.

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 13 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC Control Panel.

Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be specified in the AMC Control Panel. Enable this button from Live View Config > Viewer Settings.

AMC Audio Controls

AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when audio is enabled.

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode, the Microphone and Talk buttons must both be active to send audio to the Axis product. Click either button to stop audio transmission.

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel:

•Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

•Toggle mode: Click once to switch between talking and listening.

Simplex – speaker only mode

To send audio, the Talk and Microphone buttons must both be active. Click either button to stop audio transmission.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis P3346-V Fixed Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis P3346-V Fixed Dome Network Camera Table of ContentsConnectors Technical SpecificationsHardware Overview Connectors and ButtonsNetwork Connector ConnectorControl Button LED IndicatorsAudio Connector SD Card SlotStart a browser Internet Explorer, Firefox, Safari Accessing the ProductAccess from a Browser Click Use Https Access from the InternetSet the Root Password Manual Trigger Configure Capture ModeLive View Controls on the Live ViewAMC Audio Controls Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewPTZ Controls Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductVideo Stream Video and Audio264 Click Save to apply the new settingsPixel Counter ImageStream Profiles Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWhite Balance Exposure SettingsIris adjustment Image AppearanceDay/Night View AreaOverlay Go to Video & Audio Overlay Image Privacy MaskOverlay Image Go to Video & Audio Focus & Zoom Audio SettingsFocus & Zoom Audio ModesAudio Output Audio ClipsAudio Input Axis P3346-V Fixed Dome Network Camera Default Viewer for Browsers Live View ConfigOutput Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P3346-V Fixed Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions To add a guard tour Guard TourAdvanced ControlsGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionParameter Object Size History Sensitivity Description Set Up Motion Detection WindowsMotion Detection Parameters Go to Detectors Motion DetectionAudio Detection Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P3346-V Fixed Dome Network Camera Events Go to Events Action Rules and click Add Setting Up an Action RuleTime PTZ ControlGo to Events Recipients and click Add RecipientsRecipient Use with action Go to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesGo to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Go to System Options Storage and click SD Card StorageSD Card Network SharePort Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config Checking the Firmware TroubleshootingEmergency Recovery Procedure To upgrade, follow these instructionsProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Supported Function/group Specifications Network SecurityInstallation aids MaintenanceDimensions Function/group Specifications General CasingPower ConnectorsFunction Pin Specifications ConnectorsTip Microphone/Line Line out mono Ring Sleeve Ground Performance ConsiderationsAudio Input Audio Output M3.7
Related manuals
Manual 104 pages 30.41 Kb
Top Page Image Contents