Axis Communications P3346-V user manual Setting Up an Action Rule, Time, PTZ Control

AXIS P3346-V Fixed Dome Network Camera

Events

•Time

-Recurrence – Trigger the rule periodically. SeeRecurrences on page 39. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules on page 39.

Available actions include:

•Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).

•Output Port – Activate an I/O port to control an external device.

•Overlay Text – Display an overlay text. See.

•Play Audio Clip – See Audio Clips on page 24.

•PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. SeeGuard Tour on page 30.

•Record Video – Record video to a selected storage.

•Send Images – Send images to a recipient.

•Send Notifications – Send a notification message to a recipient.

•Send Video Clip – Send a video clip to a recipient.

•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.

Setting Up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action.

The following example describes how to set up an action rule to record video to a network share if there is movement in the camera’s field of view.

Set up motion detection and add a network share:

1.Go to Detectors > Motion Detection and configure a motion detection window. See page 32

2.Go to System Options > Storage and set up the network share. See page 50.

Set up the action rule:

1.Go to Events > Action Rules and click Add.

2.Select Enable rule and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list. Select the motion detection window to use.

5.Optionally, select a Schedule and Additional conditions. See below.

6.Under Actions, select Record Video from the Type drop-down list.

7.Select a Stream profile and configure the Duration settings as described below.

8.Select Network Share from the Storage drop-down list.

37