Axis Communications P3346-V user manual Advanced TCP/IP Settings, Axis Video Hosting System Avhs

Page 46

AXIS P3346-V Fixed Dome Network Camera

System Options

ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press the product’s control button (see Hardware Overview on page 6 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Axis P3346-V Fixed Dome Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3346-V Fixed Dome Network CameraTechnical Specifications ConnectorsConnector Connectors and ButtonsNetwork Connector Hardware OverviewSD Card Slot LED IndicatorsAudio Connector Control ButtonAccess from a Browser Accessing the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Use Https Controls on the Live View Configure Capture ModeLive View Manual TriggerTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar AMC Audio ControlsPTZ Controls Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Basic SetupVideo and Audio Video StreamImage Click Save to apply the new settingsPixel Counter 264Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Stream ProfilesImage Appearance Exposure SettingsIris adjustment White BalanceOverlay View AreaDay/Night Overlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Modes Audio SettingsFocus & Zoom Go to Video & Audio Focus & ZoomAudio Input Audio ClipsAudio Output Axis P3346-V Fixed Dome Network Camera Live View Config Default Viewer for BrowsersUser Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P3346-V Fixed Dome Network Camera Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Controls Guard TourAdvanced To add a guard tourMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionAudio Detection Applications Install ApplicationGo to Setup Applications Application LicensesAxis P3346-V Fixed Dome Network Camera Events PTZ Control Setting Up an Action RuleTime Go to Events Action Rules and click AddRecipient Use with action RecipientsGo to Events Recipients and click Add Recurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Click Install certificate and upload the certificate To install a self-signed certificateGo to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share StorageSD Card Go to System Options Storage and click SD CardPorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload To upgrade, follow these instructions TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Maintenance Function/group Specifications Network SecurityInstallation aids SupportedConnectors Function/group Specifications General CasingPower DimensionsConnectors Function Pin SpecificationsAudio Input Audio Output Performance ConsiderationsTip Microphone/Line Line out mono Ring Sleeve Ground M3.7
Related manuals
Manual 104 pages 30.41 Kb
Top Page Image Contents