Axis Communications P3304 user manual Support, Learn More

Page 3

The power supply used with this product shall fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS) according to IEC/EN/UL 60950-1.

Battery

The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.

Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. For more information about the server report, see the product´s setup pages or contact Axis support.

The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at www.axis.com/techsup for assistance.

WARNING

Risk of explosion if the battery is incorrectly replaced.

Replace only with an identical battery or a battery which is recommended by Axis.

Dispose of used batteries according to local regulations or the battery manufacturer's instructions.

Disposal and Recycling

When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.

Europe

This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly.

This product complies with the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

China

This product complies with the requirements of the legislative act Administration on the Control of Pollution Caused by Electronic Information Products (ACPEIP).

Contact Information

Axis Communications AB

Emdalavägen 14

223 69 Lund

Sweden

Tel: +46 46 272 18 00

Fax: +46 46 13 61 30

www.axis.com

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and software updates

find answers to resolved problems in the FAQ database. Search by product, category, or phrase

report problems to Axis support staff by logging in to your private support area

chat with Axis support staff (selected countries only)

visit Axis Support at www.axis.com/techsup/

Learn More!

Visit Axis learning center www.axis.com/academy/ for useful trainings, webinars, tutorials and guides.

Image 3
Contents Axis P3304 Fixed Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsLearn More SupportAxis P3304 Fixed Dome Network Camera Table of ContentsPerformance Considerations Symptoms, Possible Causes and Remedial ActionsConnectors and Buttons For technical specifications, seeHardware Overview LED Indicators Axis P3304 Fixed Dome Network Camera Access the Product Access from a BrowserStart a browser Internet Explorer, Firefox, Safari Access from the Internet Set the Root PasswordClick Create self-signed certificate Controls on the Live View Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio Controls Axis P3304 Fixed Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsSet Up the Product Basic SetupFocus Adjustment Video and Audio Video StreamImage Resolution. Select the default resolution Click Save to apply the new settings264 Stream Profiles Camera SettingsGo to Video & Audio Video Stream and select the Image tab Iris adjustmentView Area OverlayPrivacy Mask Overlay ImageGo to Video & Audio Overlay Image Audio Settings Audio ModesAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewOutput Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P3304 Fixed Dome Network Camera Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom To add a guard tour Guard TourAdvanced ControlsGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionParameter Object Size History Sensitivity Description Set Up Motion Detection WindowsMotion Detection Parameters Go to Detectors Motion DetectionAudio Detection Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P3304 Fixed Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesSet Up Recurrences Add RecipientsCreate Schedules Go to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Users To log in again and be configured to use this functionalitySystem Options SecurityCertificates Date & TimeIeee Audio SupportNetwork Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings Select Use the host name to set the host name manually Link-Local IPv4 AddressNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Port Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigFile Upload Check the Firmware TroubleshootingUpgrade the Firmware Firmware To upgrade the product’s firmwareProduct cannot be accessed from a browser Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct is accessible locally but not externally Problems with streaming H.264Basic Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsTechnical Specifications Memory Power Function/group Specifications System ApplicationInstallation aids MaintenanceFunction/group Specifications Included Accessories User license, smoked transparent cover VideoPerformance Considerations M2.5

P3304 specifications

The Axis Communications P3304 is a highly regarded network camera that caters to a variety of surveillance needs. Renowned for its robust performance and advanced features, the P3304 has become a popular choice for businesses and organizations seeking reliable security solutions.

One of the main features of the Axis P3304 is its exceptional image quality. Equipped with a 1/3” progressive scan RGB CMOS sensor, the camera delivers high-definition video footage with a resolution of 1280x720 pixels, ensuring that critical details are captured clearly. The camera supports multiple video streams, allowing users to optimize bandwidth usage and customize viewing options according to specific requirements.

The P3304 boasts a wide dynamic range (WDR) technology, which enables it to handle challenging lighting conditions. This feature enhances visibility in environments with bright and dark areas, making it ideal for settings like entrance foyers or retail stores, where varying lighting can make surveillance difficult. WDR ensures that both shadows and highlights are captured effectively, leading to improved overall image quality.

Additionally, the camera is equipped with Axis’ Zipstream technology, which optimizes bandwidth and storage without compromising image quality. By analyzing the scene and automatically reducing the bitrate of areas with little detail, Zipstream allows for significant savings in data storage and transmission costs, making it an efficient choice for businesses with extensive surveillance needs.

The Axis P3304 also includes features designed for enhanced security and ease of use. It is compliant with the ONVIF profile, ensuring compatibility with a wide range of video management systems. This makes integration into existing security infrastructures seamless and hassle-free. Furthermore, the camera has built-in analytics capabilities, such as motion detection and tampering alarm, which bolster its functionality and provide additional layers of security.

Durability is another hallmark of the Axis P3304. The camera is designed to operate in various environmental conditions, with an IP51 rating for ingress protection against dust and moisture. This makes it suitable for both indoor and outdoor installations.

In summary, the Axis Communications P3304 is a versatile network camera that combines high-definition video quality, advanced technologies like WDR and Zipstream, and strong durability. With its array of features tailored for security and surveillance, it provides an effective solution for a wide range of applications, meeting the demands of modern security needs efficiently.