Axis Communications P3304 user manual Applications, Application Licenses, Install Application

Page 33

AXIS P3304 Fixed Dome Network Camera

Applications

Applications

Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, downloads, trials and licenses, go to www.axis.com/applications

Note

•It is recommended to run one application at a time.

•Avoid running applications when the built-in motion detection is active.

Application Licenses

Some applications need a license to run. Licenses can be installed in two ways:

•Automatic installation — requires access to the Internet

•Manual installation — obtain the license key from the application vendor and upload the key to the Axis product

To request a license, the Axis product serial number (S/N) is required. The serial number can be found on the product label and under System Options > Support > System Overview.

Install Application

To install and start an application:

1.Go to Setup > Applications.

2.Under Upload Application, click Browse. Locate the application file and click Upload Package.

3.Install the license (if applicable). For instructions, see the documentation provided by the application vendor.

4.Start the application. Go to page Applications, select the application in the list of installed applications and click Start.

5.Configure the application. For instructions, see the documentation provided by the application vendor.

Note

•Applications can be uploaded by product administrators.

•Applications and licenses can be installed on multiple products at the same time using AXIS Camera Management, version 3.10 and later.

To generate a log file for the application, go to Applications. Select the application and click Log.

Application Considerations

If an application is upgraded, application settings, including the license, will be removed. The license must be reinstalled and the application reconfigured.

If the Axis product’s firmware is upgraded, installed applications and their settings will remain unchanged, although this is not guaranteed by Axis Communications AB. Note that the application must be supported by the new firmware. For information about firmware upgrades, see Upgrade the Firmware.

If the Axis product is restarted, running applications will restart automatically.

If the Axis product is restored, installed applications remain unchanged but must be restarted. To start the application, go to Setup > Applications. Select the application in the list of installed applications and click Start. For information about restoring the Axis product, see Maintenance.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Axis P3304 Fixed Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsLearn More SupportAxis P3304 Fixed Dome Network Camera Table of ContentsPerformance Considerations Symptoms, Possible Causes and Remedial ActionsConnectors and Buttons For technical specifications, seeHardware Overview LED Indicators Axis P3304 Fixed Dome Network Camera Access the Product Access from a BrowserStart a browser Internet Explorer, Firefox, Safari Access from the Internet Set the Root PasswordClick Create self-signed certificate Controls on the Live View Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio Controls Axis P3304 Fixed Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsSet Up the Product Basic SetupFocus Adjustment Video and Audio Video StreamImage Resolution. Select the default resolution Click Save to apply the new settings264 Stream Profiles Camera SettingsView Area Iris adjustmentOverlay Go to Video & Audio Video Stream and select the Image tabPrivacy Mask Overlay ImageGo to Video & Audio Overlay Image Audio Settings Audio ModesAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewGo to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P3304 Fixed Dome Network Camera Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Advanced Guard TourControls To add a guard tourCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Go to Setup Applications Install ApplicationApplications Application LicensesAxis P3304 Fixed Dome Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddSet Up Recurrences Add RecipientsCreate Schedules Recording List RecordingsContinuous Recording Go to Recordings ListClick Save to save and start the recording System Options To log in again and be configured to use this functionalitySecurity UsersIeee Date & TimeAudio Support CertificatesIPv4 Address Configuration Basic TCP/IP SettingsIPv6 Address Configuration NetworkAdvanced TCP/IP Settings Select Use the host name to set the host name manually Link-Local IPv4 AddressNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenancePorts Port StatusSupport Overview SupportSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Upgrade the Firmware TroubleshootingFirmware To upgrade the product’s firmware Check the FirmwareSymptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsTechnical Specifications Installation aids Function/group Specifications System ApplicationMaintenance Memory PowerFunction/group Specifications Included Accessories User license, smoked transparent cover VideoPerformance Considerations M2.5

P3304 specifications

The Axis Communications P3304 is a highly regarded network camera that caters to a variety of surveillance needs. Renowned for its robust performance and advanced features, the P3304 has become a popular choice for businesses and organizations seeking reliable security solutions.

One of the main features of the Axis P3304 is its exceptional image quality. Equipped with a 1/3” progressive scan RGB CMOS sensor, the camera delivers high-definition video footage with a resolution of 1280x720 pixels, ensuring that critical details are captured clearly. The camera supports multiple video streams, allowing users to optimize bandwidth usage and customize viewing options according to specific requirements.

The P3304 boasts a wide dynamic range (WDR) technology, which enables it to handle challenging lighting conditions. This feature enhances visibility in environments with bright and dark areas, making it ideal for settings like entrance foyers or retail stores, where varying lighting can make surveillance difficult. WDR ensures that both shadows and highlights are captured effectively, leading to improved overall image quality.

Additionally, the camera is equipped with Axis’ Zipstream technology, which optimizes bandwidth and storage without compromising image quality. By analyzing the scene and automatically reducing the bitrate of areas with little detail, Zipstream allows for significant savings in data storage and transmission costs, making it an efficient choice for businesses with extensive surveillance needs.

The Axis P3304 also includes features designed for enhanced security and ease of use. It is compliant with the ONVIF profile, ensuring compatibility with a wide range of video management systems. This makes integration into existing security infrastructures seamless and hassle-free. Furthermore, the camera has built-in analytics capabilities, such as motion detection and tampering alarm, which bolster its functionality and provide additional layers of security.

Durability is another hallmark of the Axis P3304. The camera is designed to operate in various environmental conditions, with an IP51 rating for ingress protection against dust and moisture. This makes it suitable for both indoor and outdoor installations.

In summary, the Axis Communications P3304 is a versatile network camera that combines high-definition video quality, advanced technologies like WDR and Zipstream, and strong durability. With its array of features tailored for security and surveillance, it provides an effective solution for a wide range of applications, meeting the demands of modern security needs efficiently.
Top Page Image Contents