Axis Communications P3363-V Accessing the Product Access from the Internet, Set the Root Password

Page 10

AXIS P3363–V Network Camera

Accessing the Product

Access from the Internet

Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must configure your network router to allow incoming data traffic to the product. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the product. This is enabled from Setup > System Options >

Network > TCP/IP Advanced.

For more information, please see NAT traversal (port mapping) for IPv4, on page 47. See also AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup

Set the Root Password

To gain access to the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which appears when the product is accessed for the first time.

To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS certificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. The HTTPS certificate ensures encrypted exchange of information. See HTTPS, on page 47.

The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings, on page 52.

To set the password via a standard HTTP connection, enter it directly in the first dialog.

To set the password via an encrypted HTTPS connection, follow these steps:

1.Click Create self-signed certificate.

2.Provide the requested information and click OK. The certificate is created and the password can now be set securely. All traffic to and from the product is encrypted from this point on.

3.Enter a password and then re-enter to confirm the spelling. Click OK. The password has now been configured.

Set Power Line Frequency

Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 52) or by resetting the product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Axis P3363-V Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3363-V Network CameraTechnical Specifications Hardware Overview ConnectorsHardware Overview LED Indicators Color IndicationAxis P3363-V Network Camera Accessing the Product Accessing the ProductAccess from a Browser Set Power Line Frequency Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P3363-V Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio ImageStream Profiles 264Image Appearance Video and Audio Camera SettingsExposure Settings White BalanceSet Shutter to Iris adjustmentView Area Day/NightGo to Video & Audio Video Stream and select the Image tab OverlayOverlay Image Go to Video & Audio Overlay ImageFocus & Zoom Privacy MaskGo to Video & Audio Focus & Zoom Audio Modes Audio SettingsAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P3363-V Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourLimits AdvancedControls Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersLow level 0% Default valuesAudio Detection Recommended valuesApplications Install ApplicationApplications Application LicensesAxis P3363-V Network Camera Events EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with action RecipientsSchedules Go to Events Recipients and click AddEvents Recurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersIeee Go to System Options Security HttpsCertificates CertificatesGo to System Options Security Ieee Audio Support Date & TimeGo to System Options Security Certificates Basic TCP/IP Settings NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourPorts Ports & DevicesNetwork Share Go to System Options Storage Click Network ShareMaintenance SupportScripting Reset to Factory Default SettingsPlain Config File UploadAxis P3363-V Network Camera Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationAlarm actions ConnectorsPerformance Considerations M2.3
Top Page Image Contents