Axis Communications P1346-E user manual Media streams, How to stream H.264, Axis Media Control AMC

Page 16

AXIS P1346–E Network Camera

Media streams

Media streams

The Axis product provides several audio and video stream formats. Your requirements and the properties of your network will determine the type you use.

The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available stream profiles. Other applications and clients can access video and audio streams directly, without going via the Live View page.

How to stream H.264

The video compression standard H.264 makes good use of bandwidth, and can provide high quality video streams at less than 1 Mbit/s.

Deciding which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are:

Unicast RTP

This unicast method (RTP over UDP) is used

 

 

for live unicast video, especially when it is

 

 

important to always have an up-to-date video

 

 

stream, even if some images are dropped.

Unicasting is used for video-on-demand

 

 

transmission so that there is no video traffic

RTP over RTSP

This unicast method (RTP tunneled over RTSP)

on the network until a client connects and

 

is useful as it is relatively simple to configure

 

requests the stream.

 

firewalls to allow RTSP traffic.

 

Note that there are a maximum of 20

 

 

RTP over RTSP over HTTP

This unicast method can be used to traverse

simultaneous unicast connections.

 

firewalls. Firewalls are commonly configured to

 

 

allow the HTTP protocol, thus allowing RTP to

 

 

be tunneled.

 

 

 

 

Multicast RTP

This method (RTP over UDP) should be used for live multicast video. The video stream is always

 

up-to-date, even if some images are dropped.

 

 

Multicasting provides the most efficient usage of bandwidth when there are large numbers of

 

clients viewing simultaneously. A multicast cannot however, pass a network router unless the

 

router is configured to allow this. It is not possible to multicast over the Internet, for example.

 

Note also that all multicast viewers count as one unicast viewer in the maximum total of 20

 

simultaneous connections.

 

 

 

 

AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements.

Note

H.264 is licensed technology. The Axis product includes one H.264 viewing client license. Installing additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller.

MJPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream. The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS Media Control in Internet Explorer in Windows.

AXIS Media Control (AMC)

AXIS Media Control (AMC) in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product.

16

Image 16
Contents Axis P1346-E Network Camera Safety About this documentLiability Intellectual Property RightsTable of Contents Axis P1346-E Network CameraSymptoms, possible causes and remedial actions Performance considerationsHardware overview Hardware overviewAxis P1346-E Network Camera Connectors For technical specifications, see Function Pin SpecificationsTo +40 V DC Max voltage = +40 V DCLED indicators Status LED when using Focus AssistantMaintenance Replacing the lensAxis P1346-E Network Camera Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariAccess from the Internet Set the root passwordNetwork TCP/IP Advanced Click Create self-signed certificateLive View Configure capture modeControls on the Live View Axis Media Control viewer toolbar AMC Audio controlsHalf-duplex mode PTZ ControlsHow to stream H.264 Media streamsMedia streams Axis Media Control AMCAlternative methods of accessing the video stream QuickTimeTM. The following paths can be usedAccessing audio streams Java applet supports simplex audio with G.711 encodingSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterImage Stream Profiles264 Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Image AppearanceExposure Settings Iris adjustmentWhite balance Wide Dynamic Range Dynamic ContrastView Areas OverlayPrivacy Mask Overlay imageAudio Settings FocusAudio Channels BasicAudio Output Audio InputG711 G726 Audio Clips Live View Config Default viewer for browsersLive View Config Viewer Settings User Defined LinksOutput Buttons Browser Viewer DescriptionPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomGuard Tour AdvancedControls To add a guard tourDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Motion detection parametersDefault values Audio detectionLow level 0% Recommended valuesApplications ApplicationsEvents EventsSetting Up an Action Rule Convert Event Types to Action RulesPTZ Control Go to Events Action Rules and click AddSchedules RecipientsRecurrences To set up a recurrence Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous recordingAxis P1346-E Network Camera System Options System OptionsSecurity UsersIeee Date & TimeAudio Support Basic TCP/IP Settings NetworkIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to factory default settings ScriptingFile Upload Plain ConfigTroubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Video and image problems, general Setup Video & Audio Camera SettingsProblems uploading files No images displayed on webSettings Storage and disk management problemsMotion Detection triggers unexpectedly No audioTechnical Specifications Technical SpecificationsMaintenance Installation aids Function/group Specifications Audio outputBuilt-in MicrophonePerformance considerations Axis P1346-E Network Camera M3.3

P1346-E specifications

Axis Communications P1346-E is a high-performance network camera designed for outdoor surveillance applications. This device combines advanced technology with ease of use, ensuring reliable security monitoring in various environments. The P1346-E is part of Axis’s extensive line of IP cameras, recognized for their quality and innovation in the field of network video surveillance.

One of the standout features of the P1346-E is its 1/2.8 inch progressive scan CMOS sensor, which enables high-definition video capture at resolutions up to 1080p (1920x1080 pixels). This resolution not only provides exceptional image clarity but also allows for detailed identification of subjects, making it an optimal choice for critical surveillance areas.

The P1346-E incorporates Axis's Lightfinder technology, which enhances the camera's performance in low-light conditions. This innovative feature delivers color images in dim environments, enabling comprehensive monitoring even during nighttime or in poorly lit areas. Additionally, it supports Wide Dynamic Range (WDR) technology, which captures details in both bright and dark areas of the scene. This is particularly beneficial in challenging lighting situations, such as entrances with powerful glare or areas transitioning between light and shadow.

Another notable aspect of the P1346-E is its weather-resistant design, rated IP66, meaning it can withstand harsh weather conditions, including rain, snow, and dust. This ruggedness makes it suitable for outdoor deployment in a variety of climates. The camera is also equipped with an integrated heater, ensuring functionality in extreme cold temperatures.

In terms of connectivity, the P1346-E supports Power over Ethernet (PoE), simplifying installations by allowing power and data transmission through a single cable. This feature enhances flexibility in camera placement and reduces installation costs. Moreover, the camera supports dual stream capabilities, allowing different video compression formats for various applications, such as H.264 and Motion JPEG.

The P1346-E is also equipped with intelligent analytics capabilities, such as motion detection and audio detection, which can trigger alerts or notifications. This adds an additional layer of security, enabling proactive monitoring of monitored areas.

In summary, the Axis Communications P1346-E is a sophisticated outdoor surveillance solution combining high-definition video quality, advanced imaging technologies, rugged design, and flexible deployment options. With its array of features, it provides reliable security solutions for various applications, from urban surveillance to critical infrastructure monitoring.