Axis Communications P1346-E user manual PTZ Controls, Half-duplex mode

Page 15

AXIS P1346–E Network Camera

Accessing the product

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel:

•Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

•Toggle mode: Click once to switch between talking and listening.

Simplex – Network Camera speaker only mode

To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio transmission.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under System Options > Security > Users.

Note

These controls are available if digital PTZ is enabled in the selected view area, see View Areas, on page 24.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.

Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding the area to be magnified. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls. User-defined buttons can also appear in the Control panel. See Controls, on page 31.

To view a specific view area or preset position, select the view area or preset position from the Source list.

Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position.

Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.

The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls, on page 31.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Axis P1346-E Network Camera Intellectual Property Rights SafetyAbout this document LiabilityAxis P1346-E Network Camera Table of ContentsPerformance considerations Symptoms, possible causes and remedial actionsHardware overview Hardware overviewAxis P1346-E Network Camera Connectors Max voltage = +40 V DC For technical specifications, seeFunction Pin Specifications To +40 V DCReplacing the lens LED indicatorsStatus LED when using Focus Assistant MaintenanceAxis P1346-E Network Camera Start a browser Internet Explorer, Firefox, Safari Accessing the productAccessing the product Access from a browserClick Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedConfigure capture mode Live ViewControls on the Live View AMC Audio controls Axis Media Control viewer toolbarPTZ Controls Half-duplex modeAxis Media Control AMC How to stream H.264Media streams Media streamsQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Pixel Counter Video and AudioVideo and Audio Video StreamStream Profiles Image264 Image Appearance Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWide Dynamic Range Dynamic Contrast Exposure SettingsIris adjustment White balanceOverlay image View AreasOverlay Privacy MaskBasic Audio SettingsFocus Audio ChannelsAudio Input Audio OutputG711 G726 Audio Clips Default viewer for browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomTo add a guard tour Guard TourAdvanced ControlsMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set Up Motion DetectionRecommended values Default valuesAudio detection Low level 0%Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules PTZ ControlRecipients SchedulesRecurrences Go to Events Recurrences and click Add To set up a recurrenceContinuous recording RecordingsRecordings Recording ListAxis P1346-E Network Camera Users System OptionsSystem Options SecurityDate & Time IeeeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to factory default settingsScripting File UploadChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly No images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesNo audio SettingsStorage and disk management problems Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsMicrophone Maintenance Installation aidsFunction/group Specifications Audio output Built-inPerformance considerations Axis P1346-E Network Camera M3.3

P1346-E specifications

Axis Communications P1346-E is a high-performance network camera designed for outdoor surveillance applications. This device combines advanced technology with ease of use, ensuring reliable security monitoring in various environments. The P1346-E is part of Axis’s extensive line of IP cameras, recognized for their quality and innovation in the field of network video surveillance.

One of the standout features of the P1346-E is its 1/2.8 inch progressive scan CMOS sensor, which enables high-definition video capture at resolutions up to 1080p (1920x1080 pixels). This resolution not only provides exceptional image clarity but also allows for detailed identification of subjects, making it an optimal choice for critical surveillance areas.

The P1346-E incorporates Axis's Lightfinder technology, which enhances the camera's performance in low-light conditions. This innovative feature delivers color images in dim environments, enabling comprehensive monitoring even during nighttime or in poorly lit areas. Additionally, it supports Wide Dynamic Range (WDR) technology, which captures details in both bright and dark areas of the scene. This is particularly beneficial in challenging lighting situations, such as entrances with powerful glare or areas transitioning between light and shadow.

Another notable aspect of the P1346-E is its weather-resistant design, rated IP66, meaning it can withstand harsh weather conditions, including rain, snow, and dust. This ruggedness makes it suitable for outdoor deployment in a variety of climates. The camera is also equipped with an integrated heater, ensuring functionality in extreme cold temperatures.

In terms of connectivity, the P1346-E supports Power over Ethernet (PoE), simplifying installations by allowing power and data transmission through a single cable. This feature enhances flexibility in camera placement and reduces installation costs. Moreover, the camera supports dual stream capabilities, allowing different video compression formats for various applications, such as H.264 and Motion JPEG.

The P1346-E is also equipped with intelligent analytics capabilities, such as motion detection and audio detection, which can trigger alerts or notifications. This adds an additional layer of security, enabling proactive monitoring of monitored areas.

In summary, the Axis Communications P1346-E is a sophisticated outdoor surveillance solution combining high-definition video quality, advanced imaging technologies, rugged design, and flexible deployment options. With its array of features, it provides reliable security solutions for various applications, from urban surveillance to critical infrastructure monitoring.
Top Page Image Contents