Axis Communications P1346-E user manual System Options, Security, Users, IP Address Filter

Page 42

AXIS P1346–E Network Camera

System Options

System Options

Security

Users

User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.

The user list displays authorized users and user groups (access levels):

Viewer - Access to the Live View page

Operator - Access to the Live View page and to all settings except System Options

Administrator - Unrestricted access to all settings; can add, modify and remove other users.

Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need to log in again and be configured to use this functionality.

Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.

Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.

Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be made before using the Axis product.

ONVIF

ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between different vendor products, increased flexibility, reduced cost and future-proof systems.

By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For more information see www.onvif.org

IP Address Filter

IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).

HTTPS

The Axis product supports encrypted browsing using HTTPS. This is configured on the System Options > Security > HTTPS page.

Aself-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click Create self-signed certificate to install a self-signed certificate. Although self-signed certificates are free and offer some protection, true security is only implemented after the installation of a signed certificate issued by a Certificate Authority.

To obtain a signed certificate from an issuing Certificate Authority, click Create Certificate Request. When the signed certificate is returned, click Install signed certificate to import the certificate. The properties of any certificate request currently resident in the product or installed can be viewed by clicking Properties.

To enable HTTPS in the Axis product, the HTTPS Connection Policy must be set for each user group.

For more information, see the online help.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Axis P1346-E Network Camera Liability SafetyAbout this document Intellectual Property RightsTable of Contents Axis P1346-E Network CameraSymptoms, possible causes and remedial actions Performance considerationsHardware overview Hardware overviewAxis P1346-E Network Camera Connectors To +40 V DC For technical specifications, seeFunction Pin Specifications Max voltage = +40 V DCMaintenance LED indicatorsStatus LED when using Focus Assistant Replacing the lensAxis P1346-E Network Camera Access from a browser Accessing the productAccessing the product Start a browser Internet Explorer, Firefox, SafariNetwork TCP/IP Advanced Access from the InternetSet the root password Click Create self-signed certificateConfigure capture mode Live ViewControls on the Live View Axis Media Control viewer toolbar AMC Audio controlsHalf-duplex mode PTZ ControlsMedia streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream QuickTimeTM. The following paths can be usedAccessing audio streams Java applet supports simplex audio with G.711 encodingSetting up the product Setting up the productBasic Setup Video Stream Video and AudioVideo and Audio Pixel CounterStream Profiles Image264 Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Image AppearanceWhite balance Exposure SettingsIris adjustment Wide Dynamic Range Dynamic ContrastPrivacy Mask View AreasOverlay Overlay imageAudio Channels Audio SettingsFocus BasicAudio Input Audio OutputG711 G726 Audio Clips Default viewer for browsers Live View ConfigLive View Config Output Buttons Viewer SettingsUser Defined Links Browser Viewer DescriptionPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls Guard TourAdvanced To add a guard tourCamera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Motion detection parametersLow level 0% Default valuesAudio detection Recommended valuesApplications ApplicationsEvents EventsPTZ Control Setting Up an Action RuleConvert Event Types to Action Rules Go to Events Action Rules and click AddRecipients SchedulesRecurrences To set up a recurrence Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous recordingAxis P1346-E Network Camera Security System OptionsSystem Options UsersDate & Time IeeeAudio Support IPv4 Address Configuration Basic TCP/IP SettingsNetwork IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourNetwork Share MaintenancePorts & Devices PortsSystem Overview SupportSupport Overview Logs & ReportsFile Upload Reset to factory default settingsScripting Plain ConfigEmergency recovery procedure TroubleshootingTroubleshooting Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Problems uploading files Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webMotion Detection triggers unexpectedly SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsBuilt-in Maintenance Installation aidsFunction/group Specifications Audio output MicrophonePerformance considerations Axis P1346-E Network Camera M3.3

P1346-E specifications

Axis Communications P1346-E is a high-performance network camera designed for outdoor surveillance applications. This device combines advanced technology with ease of use, ensuring reliable security monitoring in various environments. The P1346-E is part of Axis’s extensive line of IP cameras, recognized for their quality and innovation in the field of network video surveillance.

One of the standout features of the P1346-E is its 1/2.8 inch progressive scan CMOS sensor, which enables high-definition video capture at resolutions up to 1080p (1920x1080 pixels). This resolution not only provides exceptional image clarity but also allows for detailed identification of subjects, making it an optimal choice for critical surveillance areas.

The P1346-E incorporates Axis's Lightfinder technology, which enhances the camera's performance in low-light conditions. This innovative feature delivers color images in dim environments, enabling comprehensive monitoring even during nighttime or in poorly lit areas. Additionally, it supports Wide Dynamic Range (WDR) technology, which captures details in both bright and dark areas of the scene. This is particularly beneficial in challenging lighting situations, such as entrances with powerful glare or areas transitioning between light and shadow.

Another notable aspect of the P1346-E is its weather-resistant design, rated IP66, meaning it can withstand harsh weather conditions, including rain, snow, and dust. This ruggedness makes it suitable for outdoor deployment in a variety of climates. The camera is also equipped with an integrated heater, ensuring functionality in extreme cold temperatures.

In terms of connectivity, the P1346-E supports Power over Ethernet (PoE), simplifying installations by allowing power and data transmission through a single cable. This feature enhances flexibility in camera placement and reduces installation costs. Moreover, the camera supports dual stream capabilities, allowing different video compression formats for various applications, such as H.264 and Motion JPEG.

The P1346-E is also equipped with intelligent analytics capabilities, such as motion detection and audio detection, which can trigger alerts or notifications. This adds an additional layer of security, enabling proactive monitoring of monitored areas.

In summary, the Axis Communications P1346-E is a sophisticated outdoor surveillance solution combining high-definition video quality, advanced imaging technologies, rugged design, and flexible deployment options. With its array of features, it provides reliable security solutions for various applications, from urban surveillance to critical infrastructure monitoring.
Top Page Image Contents