Axis Communications P1346-E user manual Events

Page 36

AXIS P1346–E Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see Applications, on page 35.

•Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 34.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 32.

-Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 32.

•Hardware

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

•Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 49.

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View page, on page 13. This can for example be used to validate actions during product installation and configuration.

•PTZ

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

•System

-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 38. This can for example be used to upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 38.

Available actions include:

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Axis P1346-E Network Camera Safety About this documentLiability Intellectual Property RightsTable of Contents Axis P1346-E Network CameraSymptoms, possible causes and remedial actions Performance considerationsHardware overview Hardware overviewAxis P1346-E Network Camera Connectors For technical specifications, see Function Pin SpecificationsTo +40 V DC Max voltage = +40 V DCLED indicators Status LED when using Focus AssistantMaintenance Replacing the lensAxis P1346-E Network Camera Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariAccess from the Internet Set the root passwordNetwork TCP/IP Advanced Click Create self-signed certificateConfigure capture mode Live ViewControls on the Live View Axis Media Control viewer toolbar AMC Audio controlsHalf-duplex mode PTZ ControlsHow to stream H.264 Media streamsMedia streams Axis Media Control AMCAlternative methods of accessing the video stream QuickTimeTM. The following paths can be usedAccessing audio streams Java applet supports simplex audio with G.711 encodingSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterStream Profiles Image264 Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Image AppearanceExposure Settings Iris adjustmentWhite balance Wide Dynamic Range Dynamic ContrastView Areas OverlayPrivacy Mask Overlay imageAudio Settings FocusAudio Channels BasicAudio Input Audio OutputG711 G726 Audio Clips Default viewer for browsers Live View ConfigLive View Config Viewer Settings User Defined LinksOutput Buttons Browser Viewer DescriptionPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomGuard Tour AdvancedControls To add a guard tourDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Motion detection parametersDefault values Audio detectionLow level 0% Recommended valuesApplications ApplicationsEvents EventsSetting Up an Action Rule Convert Event Types to Action RulesPTZ Control Go to Events Action Rules and click AddRecipients SchedulesRecurrences To set up a recurrence Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous recordingAxis P1346-E Network Camera System Options System OptionsSecurity UsersDate & Time IeeeAudio Support Basic TCP/IP Settings NetworkIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to factory default settings ScriptingFile Upload Plain ConfigTroubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Video and image problems, general Setup Video & Audio Camera SettingsProblems uploading files No images displayed on webSettings Storage and disk management problemsMotion Detection triggers unexpectedly No audioTechnical Specifications Technical SpecificationsMaintenance Installation aids Function/group Specifications Audio outputBuilt-in MicrophonePerformance considerations Axis P1346-E Network Camera M3.3

P1346-E specifications

Axis Communications P1346-E is a high-performance network camera designed for outdoor surveillance applications. This device combines advanced technology with ease of use, ensuring reliable security monitoring in various environments. The P1346-E is part of Axis’s extensive line of IP cameras, recognized for their quality and innovation in the field of network video surveillance.

One of the standout features of the P1346-E is its 1/2.8 inch progressive scan CMOS sensor, which enables high-definition video capture at resolutions up to 1080p (1920x1080 pixels). This resolution not only provides exceptional image clarity but also allows for detailed identification of subjects, making it an optimal choice for critical surveillance areas.

The P1346-E incorporates Axis's Lightfinder technology, which enhances the camera's performance in low-light conditions. This innovative feature delivers color images in dim environments, enabling comprehensive monitoring even during nighttime or in poorly lit areas. Additionally, it supports Wide Dynamic Range (WDR) technology, which captures details in both bright and dark areas of the scene. This is particularly beneficial in challenging lighting situations, such as entrances with powerful glare or areas transitioning between light and shadow.

Another notable aspect of the P1346-E is its weather-resistant design, rated IP66, meaning it can withstand harsh weather conditions, including rain, snow, and dust. This ruggedness makes it suitable for outdoor deployment in a variety of climates. The camera is also equipped with an integrated heater, ensuring functionality in extreme cold temperatures.

In terms of connectivity, the P1346-E supports Power over Ethernet (PoE), simplifying installations by allowing power and data transmission through a single cable. This feature enhances flexibility in camera placement and reduces installation costs. Moreover, the camera supports dual stream capabilities, allowing different video compression formats for various applications, such as H.264 and Motion JPEG.

The P1346-E is also equipped with intelligent analytics capabilities, such as motion detection and audio detection, which can trigger alerts or notifications. This adds an additional layer of security, enabling proactive monitoring of monitored areas.

In summary, the Axis Communications P1346-E is a sophisticated outdoor surveillance solution combining high-definition video quality, advanced imaging technologies, rugged design, and flexible deployment options. With its array of features, it provides reliable security solutions for various applications, from urban surveillance to critical infrastructure monitoring.
Top Page Image Contents