Bosch Appliances VG4-300, VG4-200, VG4-500I Advanced Mode VCA Profiles, VCA configuration

102 en Configuring the IP AutoDome VG4 Modular Camera System

	NOTICE!
	In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in
	mind when assigning the profile (see Section 10.16 Advanced Mode: Encoder Profile, page 78).
	Audio
	Select the On option if you wish to additionally transmit a standalone G.711 encoded audio
	stream with alarm connections.
10.45	Advanced Mode: VCA
	The IP AutoDome contains an integrated video content analysis (VCA), which can detect and
	analyze changes in the signal using image processing algorithms. Such changes can be due to
	movements in the camera's field of view.
	You can select various VCA configurations and adapt these to your application as required.
	The Silent MOTION+ configuration is active by default. In this configuration, metadata is
	created to facilitate searches of recordings; however, no alarm is triggered.
	You can switch off the video content analysis completely if the device's full power is to be
	made available for the encoder.
	1.	Select a VCA configuration and make the required settings.
	2.	If necessary, click the Default button to return all settings to their default values.
10.46	Advanced Mode: VCA Profiles
	You can configure two profiles with different VCA configurations. You can save profiles on
	your computer's hard drive and load saved profiles from there. This can be useful if you want

to test a number of different configurations. Save a functioning configuration and test new settings. You can use the saved configuration to restore the original settings at any time.

NOTICE!

If computing power becomes short, the highest priority is always the live images and recordings. This can lead to impairment of the video content analysis. You should therefore observe the processor load and optimize the encoder settings or the video content analysis settings as necessary.

1.Select a VCA profile and enter the required settings.

2.If necessary, click the Default button to return all settings to their default values.

3.Click the Save... button to save the profile settings to another file. A new window is opened, in which you can specify where you want to save the file and what name you want to save it under.

4.Click the Load... button to load a saved profile. A new window opens in which you can select the profile file and specify where to save the file.

VCA configuration

Select one of the profiles here to activate it or edit it.

You can rename the profile.

1.To rename the file, click the icon to the right of the list field and enter the new profile name in the field.

2.Click the icon again. The new profile name is saved.

F.01U.133.268 6.0 2010.03 User’s Manual Bosch Security Systems, Inc.