Bosch Appliances VG4-200, VG4-300 Advanced Mode VCA Event triggered, Advanced Mode Audio Alarm

VG4 Modular Camera SystemConfiguring the IP AutoDome en 107

10.48	Advanced Mode: VCA Event triggered
	This configuration allows you stipulate that the video content analysis is only to be activated
	when triggered by an event. As long as no trigger is activated, the Silent MOTION+
	configuration in which metadata is created is active; this metadata facilitates searches of
	recordings, but does not trigger an alarm.
	Trigger
	You can select one of the physical alarms on the device's alarm inputs or one of the virtual
	alarms as a trigger. A virtual alarm is created using software, with RCP+ commands or alarm
	scripts, for example.
	NOTICE!
	For more information, please see the Alarm Task Script Language document and the RCP+
	documentation.
	Trigger active
	Select the VCA configuration here that is to be enabled via an active trigger. A green check
	mark to the right of the list field indicates that the trigger is active.
	Trigger inactive
	Select the VCA configuration here that is to be activated if the trigger is not active. A green
	check mark to the right of the list field indicates that the trigger is inactive.
	Delay (s)
	Select the delay period here for the reaction of the video content analysis to trigger signals.
	The alarm is only triggered after a set time interval in seconds has elapsed and then only if the
	triggering condition still exists. If the original condition has been restored before this time
	interval elapses, the alarm is not triggered. A delay period may be useful in avoiding false
	alarms or frequent triggering, for example. During the delay period, the Silent MOTION+
	configuration is always enabled.
10.49	Advanced Mode: Audio Alarm
	The IP AutoDome can create alarms on the basis of audio signals. You can configure signal

strengths and frequency ranges in such a way that false alarms, for example due to machine noise or background noise, are avoided.

NOTICE!

First set up normal audio transmission before you configure the audio alarm here (see

Section 10.18 Advanced Mode: Audio, page 80).

Audio alarm

Select On if you want the device to generate audio alarms.

Name

The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here.

CAUTION!

Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

Bosch Security Systems, Inc. User’s Manual F.01U.133.268 6.0 2010.03