Bosch Appliances VG4-200, VG4-300, VG4-500I user manual Inputs, Setup, Low, Pressure, None

VG4 Modular Camera SystemOn-Screen Display Menu Navigation en 21

Alarm Setup Menu Choices:

Menu	Description	Sub-menu / Description	Default
			Setting
Exit	Saves and exits the menu.
Inputs	Defines physical inputs or
Setup	events and commands that can
	be used in a rule. There are
	twelve (12) alarm inputs
	available.
Inputs 1-7	Defines the type of physical	N.O.: Normally open dry contact.	N.O.
	input.	N.C.: Normally closed dry contact.
		N.C.S.: Normally closed supervised
		contact.
		N.O.S.: Normally open supervised
		contact.
Low	A fixed, physical alarm input
Pressure	that detects a drop in internal
	pressure for the VG4 Pressure
	Dome.
Inputs 8-12	Defines input commands that	NONE: No command defined.	NONE
	can be used in a rule.	Aux On: Responds to a standard or
	Command inputs can also be	custom keyboard ON (1-99)
	customized by using non-	command.
	assigned keyboard command	Aux Off: Responds to a standard or
	numbers.	custom keyboard OFF (1-99)
		command.
		Shot: Responds to a Preset shot or
		scene from 1-99. (200 Series 1-64).
		AutoTrack: Triggers an alarm when
		set to ON. (Available with 500i Series
		only).
		Motion Detection: Triggers an alarm
		when set to ON. (Available with 500i
		Series only).

NOTICE! Alarm inputs 1 and 2 provide tamper detection, if programmed as supervised, for breaks or shorts in an alarm circuit. See the AutoDome Modular Camera System Installation Manual for wiring instructions.

Bosch Security Systems, Inc. User’s Manual F.01U.133.268 6.0 2010.03